We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Beige USB 2.0 A male to B male cable 1.83m

STARTECH

STARTECH USBFAB_6 USB 2.0 A to B cable 6ft 1.83m

SKU CH-ZZSZ-R9QJZ MPN USBFAB_6

Connects USB 2.0 peripherals with a durable 6ft A-to-B male cable rated for 480 Mbit/s

  • TypeUSB 2.0
  • Connector TypeUSB A to USB B
  • ColorBeige
  • Connector Number2
  • Connector DetailConnector A: 1 - USB A (4 pin) Male Connector B: 1 - USB B (
  • Terminal GenderMale to Male
  • 6 ft length gives comfortable reach for desktop peripherals
  • USB 2.0 rated for 480 Mbit/s data transfer
  • Male-to-male A-to-B connectors fit printers and hubs directly
  • Beige jacket matches legacy office equipment aesthetics
  • Lightweight 0.07 kg build eases cable routing

USB 2.0 A-to-B cable for peripherals

This six-foot USB 2.0 cable connects a standard USB-A host port to a USB-B device port. It is built for printers, scanners, external drive enclosures and similar legacy peripherals that still use the square Type-B interface. The moulded strain relief and flexible jacket make it suitable for daily desk use.

USB 2.0 – 480 Mbit/s signalling rate

The cable is rated to the USB 2.0 specification with a maximum data rate of 480 Mbit/s. That bandwidth is the single figure that decides whether the link can sustain your device’s throughput; faster USB 3.x or 4.x devices will fall back to this speed when plugged in.

Six-foot reach with 16.4 ft specification limit

At 1.83 metres the cable spans a typical desk-to-tower gap without tension. The USB 2.0 standard permits passive cables up to 16.4 ft, so this length leaves headroom for routing around monitors or under mats. Runs beyond five metres would require an active repeater or hub.

Highlights

  • 6 ft length gives comfortable reach for desktop peripherals
  • USB 2.0 rated for 480 Mbit/s data transfer
  • Male-to-male A-to-B connectors fit printers and hubs directly
  • Beige jacket matches legacy office equipment aesthetics
  • Lightweight 0.07 kg build eases cable routing

Specifications

BrandStarTech.com
ModelUSBFAB_6
TypeUSB 2.0
Connector TypeUSB A to USB B
ColorBeige
Connector Number2
Connector DetailConnector A: 1 - USB A (4 pin) Male
Connector B: 1 - USB B (4 pin) Male
Terminal GenderMale to Male
SpecificationsType and Rate: USB 2.0 - 480 Mbit/s
FeaturesReplace worn-out or missing USB cables with this high quality,6ft USB 2.0 Cable A to A - M/M
Easy to use and install
Electrical Outlet Plug TypePlug Type “A” (USA, Canada, Mexico, Japan)
Shipping weight0.07 kg
Package size156 × 122 × 24 mm

Questions about this item

What does the 480 Mbit/s rating mean when I plug this cable into my printer?

The 480 Mbit/s rating is the maximum theoretical throughput of the USB 2.0 connection; actual transfer speed will depend on the printer and host controller.

Which USB standard does this cable follow and what does it limit?

This cable follows the USB 2.0 standard, which caps the data rate at 480 Mbit/s between the host and the peripheral.

How long is the cable and will it reach from my desk to a floor-standing device?

The cable is 6 ft (1.83 m) long, providing enough reach for typical desktop-to-floor setups.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.