We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

STARTECH

STARTECH USBEXTPAA1MW 3.28 ft USB 2.0 extension cable

SKU CH-SSK8-826EE MPN USBEXTPAA1MW

A white USB 2.0 extension cable measuring 3.28 ft that adds up to 1 m of reach for controllers or mobile devices using a male-to-female Type-A connection

  • TypeUSB 2.0
  • ColorWhite
  • Length3.28 ft
  • Connector Number2
  • Connector DetailConnector A: 1 - USB A (4 pin) Male Connector B: 1 - USB A (
  • Terminal GenderMale to Female

Cable Length 3 Feet

  • Extend USB 2.0 reach by up to 1 metre with this male-to-female cable
  • White 3.28 ft PVC jacket blends cleanly into desk setups
  • Aluminium-Mylar foil shield with drain wire protects data integrity
  • Nickel-plated USB-A connectors resist corrosion for reliable mating cycles
  • Works with iPad Air, iPad mini, Galaxy Tab, Xbox One, PS4 and iMac

USB 2.0 extension cable

This 3.28 ft cable adds one metre of reach to any standard USB 2.0 connection. It fits between a host port and a peripheral cable, making rear-panel ports easier to access. The male-to-female Type-A layout suits keyboards, mice, gamepads and mobile devices. It is a straightforward solution for short factory cables.

PVC jacket with foil shield

The white PVC outer jacket resists everyday abrasion and stays flexible on a desk. Inside, an aluminium-Mylar foil wrap with a drain wire blocks common electromagnetic interference. Nickel-plated contacts on both Type-A connectors reduce oxidation over repeated insertions. The construction is rated for standard USB 2.0 signalling without signal degradation.

Check port type and length need

Verify that both ends of your existing link use full-size USB Type-A sockets before ordering. The extension only works with USB 2.0 or slower devices; it will not pass USB 3.x or USB-C signals. Ensure the extra metre does not exceed the five-metre maximum recommended for USB 2.0 passive cables. No driver or software installation is required.

Highlights

  • Extend USB 2.0 reach by up to 1 metre with this male-to-female cable
  • White 3.28 ft PVC jacket blends cleanly into desk setups
  • Aluminium-Mylar foil shield with drain wire protects data integrity
  • Nickel-plated USB-A connectors resist corrosion for reliable mating cycles
  • Works with iPad Air, iPad mini, Galaxy Tab, Xbox One, PS4 and iMac

Specifications

BrandStarTech.com
ModelUSBEXTPAA1MW
TypeUSB 2.0
ColorWhite
Length3.28 ft
Connector Number2
Connector DetailConnector A: 1 - USB A (4 pin) Male
Connector B: 1 - USB A (4 pin) Female
Terminal GenderMale to Female
SpecificationsCable Jacket Type: PVC - Polyvinyl Chloride
Cable Shield Type: Aluminum-Mylar Foil with Drain
Connector Plating: Nickel
FeaturesExtend the length of a USB 2.0 cable by up to 1m
Lengthen the reach of a controller or eliminate the hassle of connecting a mobile device to the back of a computer for syncing & charging by extending the length of the USB cable that came with your device
White USB Extension Cable
Compatible with various mobile devices such as the following tablets Apple iPad Air / iPad Mini / Samsung Galaxy Tab
Compatible with various game controllers such as Xbox One / PS4
Compatible with Apple iMac
Electrical Outlet Plug TypePlug Type “A” (USA, Canada, Mexico, Japan)
Shipping weight0.03 kg
Package size192 × 122 × 11 mm

Other versions of this model

1 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Does the USB 2.0 extension cable limit data speed to the 2.0 standard?

Yes, the cable is built to the USB 2.0 specification so throughput is capped at the 2.0 rate.

What connectors does the 3.28 ft cable need to fit?

It has a USB A male plug on one end and a USB A female port on the other, so it fits any standard USB A socket and device.

How do I install the extension cable without losing the connection?

Plug the male end into the host or hub first, then attach your device cable to the female end, making sure both click fully into place.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.