We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Clear USB 2.0 A to B cable, 10ft transparent jacket, molded connectors

STARTECH

STARTECH USB2HAB10T USB 2.0 A to B Cable 10ft

SKU CH-SVNX-HHQ78 MPN USB2HAB10T

A 10ft transparent USB 2.0 cable connecting Type-A and Type-B ports for up to 480 Mbit/s data transfer with shielded twisted-pair construction and moulded strain relief

  • TypeUSB 2.0
  • Connector TypeUSB A to USB B
  • ColorTransparent
  • Connector Number2
  • Connector DetailConnector A: 1 - USB A (4 pin) Male Connector B: 1 - USB B (
  • SpecificationsWire Gauge: 24/28 AWG Type and Rate: USB 2.0 - 480 Mbit/s

Color Transparent

Cable Length 10 Feet

  • 10 ft length gives flexible placement between computer and peripheral
  • Transparent jacket blends into any workspace or home setup
  • Twisted-pair wires with foil and braid shield reduce interference for error-free data transfer
  • Molded strain relief protects connectors from stress and extends cable life
  • Supports up to 127 daisy-chained devices on a single USB 2.0 bus

Clear 10ft USB 2.0 A-B Cable

This transparent cable connects a USB Type-A host to a USB Type-B peripheral such as a printer or external drive enclosure. It is built for users who need a 10ft reach without signal degradation and prefer a clear jacket that stays inconspicuous on a desk or in a rack. The 24/28 AWG conductors support the USB 2.0 high-speed rate of 480 Mbit/s and remain backward compatible with USB 1.1 devices. Up to 127 daisy-chained devices are supported on the same bus.

Simple Plug-In Installation

Both ends are moulded male connectors with strain relief, so the cable seats firmly without tools and resists damage from repeated insertion or tight bends behind equipment. The foil-and-braid shield plus twisted-pair wiring suppress cross-talk and interference that typically cause intermittent errors on long runs. No drivers are required; the connection is hot-pluggable on any PC or Mac. The only common issue is attempting to use the cable with a USB 3.0 or later peripheral that demands higher bandwidth than 480 Mbit/s provides.

Steady Throughput Over Long Sessions

The shielded construction and 24/28 AWG gauge maintain consistent 480 Mbit/s transfer rates during sustained bulk endpoints such as large print jobs or batch file moves. Error-free signalling prevents the retries that throttle throughput on unshielded leads after the cable warms up. The cable draws bus power normally and adds no active circuitry that could overheat or reset under continuous load. It is not suited for applications that require USB 3.x SuperSpeed bandwidth or power delivery beyond the USB 2.0 specification.

Highlights

  • 10 ft length gives flexible placement between computer and peripheral
  • Transparent jacket blends into any workspace or home setup
  • Twisted-pair wires with foil and braid shield reduce interference for error-free data transfer
  • Molded strain relief protects connectors from stress and extends cable life
  • Supports up to 127 daisy-chained devices on a single USB 2.0 bus

Specifications

BrandStarTech.com
ModelUSB2HAB10T
TypeUSB 2.0
Connector TypeUSB A to USB B
ColorTransparent
Connector Number2
Connector DetailConnector A: 1 - USB A (4 pin) Male
Connector B: 1 - USB B (4 pin) Male
SpecificationsWire Gauge: 24/28 AWG
Type and Rate: USB 2.0 - 480 Mbit/s
FeaturesTwisted-pair wires plus a foil and braid shield reduces interference and minimizes cross-talk for consistent high-speed and error-free data transfer
Supports up to 127 daisy-chained devices
USB 2.0 is backward compatible with USB 1.1
Compatible with any PC and Mac, or USB device
Hot Pluggable; allows swapping of live devices
High-speed data transfer up to 480 Mbits/sec
Transparent colour blends into any environment
Electrical Outlet Plug TypePlug Type “A” (USA, Canada, Mexico, Japan)
Shipping weight0.10 kg
Package size175 × 113 × 23 mm

Other versions of this model

4 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

How can I verify the cable is delivering the 480 Mbit/s rate after connecting it?

Connect a USB 2.0 device and check the host controller properties in Device Manager or System Information; the port should report High Speed 480 Mbit/s for that link.

What comes with the cable and is any extra adapter required?

The box contains only the 10ft transparent USB A male to USB B male cable; no additional adapters are included or required for standard A-to-B connections.

Should I choose the 10ft length or a shorter version for a desktop printer?

Pick the 10ft version when the printer sits more than about 2 metres from the PC; a shorter cable reduces clutter if the device is closer.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.