STARTECH
STARTECH US2GA30 2.5GbE USB 3.1 Type-A to RJ45 Ethernet Adapter
Adds a 2.5 Gbps Ethernet port via USB 3.1 Gen 1 Type-A with 2.5G/1G/100 Mbps auto-negotiation and VLAN tagging support
- TypeEthernet Adapter
- SpecificationsBus Type: USB 3.1 Gen 1 Chipset ID: Realtek - RTL8156 Indust
- 5 Gbps network speed backed by IEEE 802.3bz 2.5GBase-T standard
- USB 3.1 Gen 1 bus delivers 5 Gbps bandwidth for full 2.5G throughput
- Auto-negotiates 2.5G, 1G and 100 Mbps links for broad LAN compatibility
- Realtek RTL8156 chipset supports 16K jumbo frames and VLAN tagging
- USB Type-A plug works with existing laptops and workstations without new ports
USB 3.1 Gen 1 2.5GbE Adapter
The STARTECH US2GA30 adds a 2.5GBase-T RJ45 port to any system with a USB 3.1 Gen 1 Type-A socket. It targets users who need multi-gigabit wired throughput on laptops or workstations lacking an onboard 2.5 GbE controller. The Realtek RTL8156 chipset negotiates 2.5 Gbps, 1 Gbps, 100 Mbps or 10 Mbps links automatically. VLAN tagging and jumbo frames up to 16K are supported for managed-network workloads.
Passive thermals and bus power
No fan or external supply is required; the adapter draws power directly from the USB 3.1 Gen 1 bus. The aluminium casing acts as a heatsink, keeping the RTL8156 within operating limits during sustained 2.5 Gbps transfers. Acoustic output is effectively zero because there are no moving parts. Full-duplex operation and IEEE 802.3x flow control prevent frame loss without adding latency.
Plug-and-play network upgrade
Driver support is built into current Windows, macOS and Linux kernels, so the link activates on insertion without extra software. Auto-MDIX removes the need for crossover cables. The single RJ45 jack frees the host’s existing Ethernet port for a separate subnet or failover link. MTBF is rated at 10,000 hours, reflecting the absence of mechanical wear points.
Highlights
- 5 Gbps network speed backed by IEEE 802.3bz 2.5GBase-T standard
- USB 3.1 Gen 1 bus delivers 5 Gbps bandwidth for full 2.5G throughput
- Auto-negotiates 2.5G, 1G and 100 Mbps links for broad LAN compatibility
- Realtek RTL8156 chipset supports 16K jumbo frames and VLAN tagging
- USB Type-A plug works with existing laptops and workstations without new ports
Specifications
| Brand | StarTech.com |
|---|---|
| Model | US2GA30 |
| Part Number | USB 3.0 Type-A To 2.5 Gigabit Ethernet Adapter - 2.5GBase-T |
| Type | Ethernet Adapter |
| Specifications | Bus Type: USB 3.1 Gen 1 Chipset ID: Realtek - RTL8156 Industry Standards - IEEE 802.3i 10BASE-T - IEEE 802.3ab 1000BASE-T - IEEE 802.1q VLAN Tagging - IEEE 802.3x - IEEE 802.3u 100Base-TX - IEEE 802.3bz 2.5GBase-T Interface : RJ45 (Gigabit Ethernet) Auto MDIX: Yes Compatible Networks: 2.5G/1G/100Mbps/10Mbps Full Duplex Support: Yes Jumbo Frame Support: 16K max. MTBF: 10, 000 hours Promiscuous Mode: Yes Type: Copper |
| Shipping weight | 0.45 kg |
| Package size | 152 × 102 × 76 mm |
Questions about this item
How do I install the StarTech US2GA30 on a laptop that only has USB 3.0 Type-A ports?
Plug the adapter into any USB 3.0 Type-A port; the Realtek RTL8156 chipset uses the USB 3.1 Gen 1 bus and will negotiate 2.5 Gbps, 1 Gbps or 100 Mbps automatically.
What part of the US2GA30 is most likely to wear out first?
The RJ45 port is rated for an MTBF of 10,000 hours; the USB Type-A connector and cable are fixed, so the Ethernet jack sees the most insertions.
At sustained throughput, which limit appears first — the 2.5 GbE link or the USB 3.1 Gen 1 bus?
The USB 3.1 Gen 1 bus caps at 5 Gbps, so the 2.5 GbE link never saturates the bus; thermal throttling of the RTL8156 is the practical ceiling.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Digi International 70001807 wireless accessory
- Consumer Electronics
- Black
RUCKUS WIRELESS PCUSA2 NEMA 5-15 to IEC 60320 C13 power cord
HP J9694A#ABA MSM720 Wireless LAN Controller
- Wireless LAN Contro…
- 4 RJ-45 autosensing…



