We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular black box with two M.2 slots and SATA ports

STARTECH

STARTECH SM2DUPE11 Standalone M.2 SATA & NVMe Duplicator

SKU CH-HSHH-Y11MZ MPN SM2DUPE11

Standalone duplicator and eraser clones M.2 SATA, M.2 NVMe and 2.5 or 3.5 inch SATA drives at up to 7.5 GB per minute

  • Operating TypeStandalone
  • Standalone cloning up to 7.5GB/min without a PC
  • Copies M.2 PCIe, M.2 SATA, 2.5" and 3.5" SATA drives
  • Sanitises drives with multiple erase modes built in
  • Supports M.2 lengths 2230, 2242, 2260, 2280, 22110
  • Expandable to IDE and mSATA via optional adapters

Standalone M.2 & SATA Drive Duplicator

This standalone duplicator clones and sanitizes M.2 PCIe, M.2 SATA, 2.5 in. SATA, and 3.5 in. SATA drives without a host computer. It supports 1-to-1 duplication across different interface types and drive form factors including 2230, 2242, 2260, 2280, and 22110 sizes. The unit operates independently for drive deployment and data erasure tasks.

Cloning Speed and Interface Limits

Maximum sustained copy throughput reaches 7.5 GB per minute, which constrains large-volume duplication timelines. The device handles SATA and NVMe protocols but cannot duplicate drives using interfaces other than those listed. Cross-interface cloning is supported, yet the source and target must both be physically installed in the unit's native slots or approved adapters.

Installation Notes and Common Issues

Setup requires inserting source and target drives into the appropriate M.2 or SATA bays and selecting the operation mode via the front panel. Misaligned M.2 keys or unsupported drive lengths such as 2230 modules in 2280-only slots will prevent detection. Using non-validated adapters for IDE or mSATA conversion often leads to recognition failures or incomplete sanitization.

Highlights

  • Standalone cloning up to 7.5GB/min without a PC
  • Copies M.2 PCIe, M.2 SATA, 2.5" and 3.5" SATA drives
  • Sanitises drives with multiple erase modes built in
  • Supports M.2 lengths 2230, 2242, 2260, 2280, 22110
  • Expandable to IDE and mSATA via optional adapters

Specifications

Operating TypeStandalone
Shipping weight3.18 kg
Package size470 × 241 × 99 mm

Questions about this item

Which M.2 sizes does the duplicator accept?

The unit handles M.2 drives in 2230, 2242, 2260, 2280 and 22110 form factors for both SATA and PCIe interfaces.

What does the 7.5 GB per minute clone speed mean when I am copying a drive?

It is the maximum sustained throughput the duplicator can reach; actual time depends on the source drive's own read performance and capacity.

What interface standard limits the transfer rate on the SATA ports?

The SATA connectors operate at the SATA specification ceiling, so the port speed caps the clone rate when SATA drives are used.

New to this? Paying with USDT: TRC-20 or ERC-20 — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.