We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small silver SFP+ transceiver module with LC duplex port and side bail latch

STARTECH

STARTECH SFP10GSRST SFP transceiver 10GBASE-SR 850nm 300m

SKU CH-43E2-X3EPM MPN SFP10GSRST

A 10 Gbps SFP+ transceiver for multimode fibre up to 300 m with LC connectors and Digital Diagnostic Monitoring

  • StandardsIEEE 802.3ae 10GBASE-SR
  • Wavelength850nm
  • Fiber CableMulti Mode
  • ProtocolsTCP/IP
  • PortsFiber Optic LC Female
  • Max Distance300 m (984 ft)
  • 10 Gbps throughput for high-speed networking
  • 300 m reach over multimode fiber at 850 nm
  • Hot-pluggable SFP+ with LC duplex connector
  • Cisco SFP-10G-SR compatible across Firepower, ASR9000, Catalyst 9300, 9500, 3850
  • Digital Diagnostic Monitoring reports status to SNMP tools

Cisco SFP-10G-SR Compatible Transceiver

The StarTech.com SFP10GSRST is a hot-pluggable SFP+ module built to the IEEE 802.3ae 10GBASE-SR standard. It delivers 10 Gbps over multimode fiber at 850 nm wavelength with an LC duplex connector. The module is MSA compliant and guaranteed compatible with Cisco switches including Firepower, ASR9000, C9300, C3850 and C9500 series. Digital Diagnostic Monitoring support reports status to SNMP tools.

Suits Cisco and MSA Switches; Not for Longer Links

This module suits network engineers deploying 10 Gigabit Ethernet links inside data centres or campus LANs where Cisco or other MSA-compliant switches accept uncoded optics. It covers runs up to 300 m on OM3 or OM4 multimode fiber. Buyers who need longer reach or single-mode fiber should look at a different module. The transceiver does not support distances beyond the 300 m specification.

300 m Multimode Reach at 850 nm

The decisive specification is the maximum link distance of 300 m (984 ft) over multimode fiber at 850 nm. This reach fits typical rack-to-rack or intra-building connections. If your design requires longer spans or single-mode cable, this part will not meet the requirement.

Highlights

  • 10 Gbps throughput for high-speed networking
  • 300 m reach over multimode fiber at 850 nm
  • Hot-pluggable SFP+ with LC duplex connector
  • Cisco SFP-10G-SR compatible across Firepower, ASR9000, Catalyst 9300, 9500, 3850
  • Digital Diagnostic Monitoring reports status to SNMP tools

Specifications

BrandStarTech.com
ModelSFP10GSRST
StandardsIEEE 802.3ae 10GBASE-SR
Wavelength850nm
Fiber CableMulti Mode
ProtocolsTCP/IP
PortsFiber Optic LC Female
Max Distance300 m (984 ft)
Transfer Rate10 Gbps
FeatureMaximum data rates up to 11.1Gbps
Supports distances up to 300m (984ft)
Complies with SFP Multi-Source Agreements standards (MSA)
Compatible with Cisco equipment
LC Fiber connector
Fully Hot Pluggable
Weight20
Package Contents52824T
Shipping weight0.05 kg
Package size112 × 89 × 33 mm

Questions about this item

What type of fiber patch cable and connector do I need to connect the LC female port on this SFP+ module?

Use a multimode fiber patch cable with LC connectors on both ends, such as OM3 or OM4, to match the LC female port and 850nm wavelength of this module.

Will this 10GBASE-SR transceiver link with my existing 1Gb SFP ports on the same switch?

No, this module operates at a fixed 10Gbps rate under the IEEE 802.3ae standard and will not negotiate down to 1Gbps on standard SFP ports.

How can I confirm the module is operating correctly after installing it in my Cisco switch?

Check the switch interface status for a link light and use the CLI command 'show interface transceiver detail' to verify Digital Diagnostic Monitoring reports valid temperature, voltage, and optical power levels.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.