We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

STARTECH

STARTECH SFP10GBZRST 10GBASE-ZR SFP+ transceiver 80 km 1550 nm

SKU CH-D8T2-E6P8A MPN SFP10GBZRST

Delivers 10 GbE over single-mode fibre up to 80 km with an LC duplex connector

  • Device TypeTransceiver
  • StandardsIEEE 802.3ae 10GBASE-ZR
  • Wavelength1550nm
  • Fiber CableSingle-mode Optical Fiber
  • ProtocolsTCP/IP
  • Ports1 - Fiber Optic LC Duplex Female
  • Reliable 10 GbE links over single-mode fiber up to 80 km
  • Low power draw below 1.6 W reduces operating cost
  • Hot-swappable SFP+ module enables changes without downtime
  • MSA compliance ensures broad switch and router compatibility
  • Operates from 0 °C to 70 °C for standard environments

10GBASE-ZR SFP+ transceiver for 80 km links

This StarTech SFP10GBZRST module delivers 10 Gbps Ethernet over single-mode fibre using a 1550 nm wavelength. It complies with IEEE 802.3ae 10GBASE-ZR and MSA standards for broad switch compatibility. The LC duplex connector supports distances up to 80 km. Operating temperature ranges from 0 to 70 degrees Celsius.

Replaces shorter-reach 10G optics when distance

If your current 10GBASE-LR or ER transceivers cannot span the required link length, this ZR-rated unit closes the gap to 80 km. The upgrade is justified when campus or metro fibres run longer than 40 km and 10 Gbps bandwidth remains the design target. Power draw stays below 1.6 W, easing thermal budgets in dense chassis.

Verify switch port accepts 10GBASE-ZR

Confirm the host equipment lists 10GBASE-ZR support in its qualified-module matrix before ordering. Ensure your fibre plant is single-mode with LC duplex terminations and that the link loss budget accommodates the 80 km specification. Storage temperature tolerance spans -40 to 85 degrees Celsius for spares held in unconditioned spaces.

Highlights

  • Reliable 10 GbE links over single-mode fiber up to 80 km
  • Low power draw below 1.6 W reduces operating cost
  • Hot-swappable SFP+ module enables changes without downtime
  • MSA compliance ensures broad switch and router compatibility
  • Operates from 0 °C to 70 °C for standard environments

Specifications

BrandStarTech.com
ModelSFP10GBZRST
Device TypeTransceiver
StandardsIEEE 802.3ae 10GBASE-ZR
Wavelength1550nm
Fiber CableSingle-mode Optical Fiber
ProtocolsTCP/IP
Ports1 - Fiber Optic LC Duplex Female
Max Distance80 km (49.7 mi)
TemperatureOperating Temperature: 0 ~ 70 degree Celsius (32 ~ 158 degree Fahrenheit)
Storage Temperature: -40 ~ 85 degree Celsius (-40 ~ 185 degree Fahrenheit)
Humidity5~95% RH
FeatureDelivers reliable 10 Gigabit connections for 10GBase-ZR compliant networks
Meets or exceeds MSA (Multi-Source Agreement) industry standards
Supports single-mode fiber (LC connector)
Maximum distance up to 80 km / 49.7 mi
Maximum data rates up to 10 Gbps
1550nm optical wavelength
Digital Diagnostics Monitoring (DDM / DOM)
Hot-pluggable
Package Contents1 x SFP transceiver
Shipping weight0.10 kg
Package size120 × 90 × 30 mm

Questions about this item

What type of fiber connector does the SFP10GBZRST use for its single-mode link?

The module has one LC duplex female port for single-mode fiber.

How is the transceiver installed in a switch or router?

Insert the hot-swappable SFP+ module into an SFP+ slot until it clicks; the common mistake is not pushing it in far enough to latch.

What operating temperature range should be maintained for reliable long-term use?

Keep the ambient temperature between 0 °C and 70 °C (32 °F to 158 °F) during operation.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.