We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small rectangular metal module with LC duplex port and side label

STARTECH

STARTECH SFP10GBLRST 10GBASE-LR SFP+ transceiver 10 km 1310 nm

SKU CH-A42Y-238DT MPN SFP10GBLRST

Delivers 10 Gbps over single-mode fibre up to 10 km with an LC duplex connector and MSA-compliant SFP+ module

  • Device TypeTransceiver
  • StandardsIEEE 802.3ae 10GBASE-LR
  • Wavelength1310nm
  • Fiber CableSingle-mode Optical Fiber
  • ProtocolsTCP/IP
  • Ports1 - Fiber Optic LC Duplex Female
  • Reliable 10 Gbps links over single-mode fiber up to 10 km
  • IEEE 802.3ae 10GBASE-LR standard ensures broad switch compatibility
  • MSA compliant design fits multi-vendor SFP+ slots
  • Hot-swappable module installs or replaces without network downtime
  • Low power draw under 1.3 W reduces system heat load

Product identity

The StarTech SFP10GBLRST is a 10GBASE-LR SFP+ transceiver built for single-mode fibre links up to 10 km. It suits network engineers extending 10 Gbps connections between switches or routers across campus or metro distances. The module plugs into any MSA-compliant SFP+ cage and uses an LC duplex connector. It is not for multimode fibre runs or distances beyond 10 km.

Thermals noise power

The transceiver draws less than 1.3 W during operation and runs without a fan, so it adds no audible noise to the rack. Operating temperature spans 0 to 70 °C with humidity tolerance of 5 to 95 % RH, allowing deployment in standard data-centre aisles. Storage temperature reaches -40 to 85 °C for spare inventory kept in unconditioned spaces. Power consumption stays constant regardless of link length.

Bundled value

The package contains only the transceiver itself; no patch cables, cleaning tools or diagnostic software are included. MSA compliance means the module works in third-party switches without vendor lock-in, reducing procurement friction. Hot-swap support lets technicians replace a unit without powering down the chassis, cutting planned-maintenance windows. No licence keys or firmware bundles accompany the hardware.

Highlights

  • Reliable 10 Gbps links over single-mode fiber up to 10 km
  • IEEE 802.3ae 10GBASE-LR standard ensures broad switch compatibility
  • MSA compliant design fits multi-vendor SFP+ slots
  • Hot-swappable module installs or replaces without network downtime
  • Low power draw under 1.3 W reduces system heat load

Specifications

BrandStarTech.com
ModelSFP10GBLRST
Device TypeTransceiver
StandardsIEEE 802.3ae 10GBASE-LR
Wavelength1310nm
Fiber CableSingle-mode Optical Fiber
ProtocolsTCP/IP
Ports1 - Fiber Optic LC Duplex Female
Max Distance10 km (6.2 mi)
TemperatureOperating Temperature: 0 ~ 70 degree Celsius (32 ~ 158 degree Fahrenheit)
Storage Temperature: -40 ~ 85 degree Celsius (-40 ~ 185 degree Fahrenheit)
Humidity5~95% RH
FeatureDelivers reliable 10 Gigabit connections for 10GBase-LR compliant networks
Meets or exceeds MSA (Multi-Source Agreement) industry standards
Supports single-mode fiber (LC connector)
Maximum distance up to 10 km / 6.2 mi.
Maximum data rates up to 10 Gbps
1310nm optical wavelength
Digital Diagnostics Monitoring (DDM / DOM)
Hot-pluggable
Package Contents1 x SFP transceiver
Shipping weight0.05 kg
Package size112 × 94 × 33 mm

Questions about this item

How is the SFP+ transceiver installed, and which step do people often get wrong?

Slide the module into an SFP+ cage until it clicks, then insert the LC duplex connectors with the correct Tx/Rx orientation; reversing the fibers is the common mistake.

What maintenance or replacement will the SFP10GBLRST need later?

No scheduled maintenance is required; keep the LC ports covered when unused and replace the module only if link errors appear or optical output degrades.

What limit appears first under sustained use of this 10GBASE-LR transceiver?

The operating temperature ceiling of 70 °C is the first sustained-use limit; ensure adequate chassis airflow to stay below this threshold.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.