STARTECH
STARTECH PAC10010PK 10-pack computer power cord
A 10-pack of 1 ft C14 to NEMA 5-15R power cords rated 125V at 10A using 18 AWG wire for powering monitors or printers from a PC switched source
- Power up to 10 devices from one pack
- Connect monitors or printers via PC switched source
- Durable 18 AWG wire rated 125V 10A
- C14 to NEMA 5-15R connectors for broad compatibility
- 1 ft length simplifies cable management
Ten-pack of short C14 to NEMA 5-15R cords
This ten-pack supplies one-foot C14 to NEMA 5-15R cables for powering monitors or printers from a PC's switched outlet. Each cord uses 18 AWG wire rated for 125V at 10A. The bulk pack suits IT teams fitting out multiple workstations or rack-mounted gear. Builders needing longer runs or different connector types should look elsewhere.
C14 to NEMA 5-15R connector pairing
The deciding specification is the C14 plug mating with a NEMA 5-15R receptacle. This combination draws auxiliary power from a computer power supply to a peripheral device. Verify that both the source outlet and the target equipment match these exact connectors before ordering.
Hooded plugs aid dense cable routing
Each cable features a hooded plug on the C14 end and a standard receptacle on the NEMA 5-15R end. The short one-foot length reduces slack in tight cabinets or behind multi-monitor stands. No software or additional accessories are included in the package.
Highlights
- Power up to 10 devices from one pack
- Connect monitors or printers via PC switched source
- Durable 18 AWG wire rated 125V 10A
- C14 to NEMA 5-15R connectors for broad compatibility
- 1 ft length simplifies cable management
Specifications
No published specifications for this item yet.
Questions about this item
How does the 1 ft length affect cable routing inside a typical case?
The short 1 ft cords reduce excess slack, making it easier to route power from a PC's switched outlet to nearby monitors or printers without tangled loops.
What does the C14 to NEMA 5-15R connection actually support?
Each cord carries 125 V at 10 A over 18 AWG wire, linking a standard PC power outlet to a monitor or printer with a C14 inlet.
What clearance do the hooded plug and receptacle need to sit flush?
The moulded hooded C14 plug and NEMA 5-15R receptacle require only the depth of a standard IEC inlet and North American wall socket, fitting tight spaces behind equipment.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



