We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

STARTECH

STARTECH NLWH9FCAT6APATCH network ethernet cable

SKU CH-0H9R-AW9PR MPN NLWH9FCAT6APATCH

A 9 ft Cat6a LSZH shielded patch cord supporting 10 Gbps and 100 W PoE++ with snagless RJ45 connectors

  • Supports 10 Gbps and 100 W PoE++ for high-speed powered devices
  • LSZH jacket emits minimal smoke and no halogen in fire emergencies
  • S/FTP shielding blocks EMI and RFI for reliable data transmission
  • Snagless RJ-45 boots protect connector tabs during routing and installation
  • Meets IEEE 802.3bt-2018 standard for Type 4 Power over Ethernet

9ft LSZH Cat6a PoE++ Cable

This nine-foot white Cat6a patch cord uses low-smoke zero-halogen jacket material and shielded twisted-pair construction. It targets installers who need 10 GbE performance in plenum or riser spaces where PVC cables are restricted. The cable carries 100 W PoE++ for Type 4 powered devices such as wireless access points and IP cameras.

Shielded Upgrade from Unshielded Cat6

The S/FTP shielding replaces unshielded Cat6 or Cat5e runs when electromagnetic interference from lighting ballasts or industrial equipment degrades throughput. The jump is worth it when the link must sustain 2.5, 5 or 10 Gbps over the full 9 ft without packet loss. LSZH jacketing also satisfies fire-code requirements that standard PVC cannot meet.

Snagless Boots Simplify Routing

Molded snagless boots protect the RJ-45 latch during pulls through cable trays or tight conduit bends. Integrated strain relief prevents sharp bends at the connector that cause intermittent opens. The only common issue is the slightly larger diameter of shielded LSZH cable, which may require wider conduit fill calculations compared to thinner unshielded patch cords.

Highlights

  • Supports 10 Gbps and 100 W PoE++ for high-speed powered devices
  • LSZH jacket emits minimal smoke and no halogen in fire emergencies
  • S/FTP shielding blocks EMI and RFI for reliable data transmission
  • Snagless RJ-45 boots protect connector tabs during routing and installation
  • Meets IEEE 802.3bt-2018 standard for Type 4 Power over Ethernet

Specifications

No published specifications for this item yet.

Questions about this item

What rack-space clearance does the 9 ft white LSZH Cat6a patch cord with snagless boots need?

The 9 ft length and low-profile snagless boots let the cord route through standard 1 U patch panels and dense switch ports without blocking adjacent jacks.

Which step is most often missed when terminating the S/FTP shielded connectors on this 10 GbE cable?

Folding the drain wire back over the foil shield and seating it inside the metal RJ45 housing so the shield contacts the panel ground.

When should the LSZH jacket on this 100 W PoE++ cord be inspected or replaced?

Inspect after any fire event, sharp bend kink, or connector latch failure; replace if the white jacket shows scorch marks, cracks, or the snagless boot no longer holds the tab.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.