STARTECH
STARTECH NLWH8FCAT6APATCH network ethernet cable
An 8 ft white Cat6a S/FTP cable with LSZH jacket, snagless RJ45 plugs and 100 W PoE++ support for 10 Gbps links
- Supports 1/2.5/5/10 Gbps speeds for fast multi-gigabit networking
- LSZH jacket emits low smoke and zero halogen for safer fire evacuations
- Delivers up to 100 W PoE++ per IEEE 802.3bt-2018 for high-power devices
- S/FTP shielding blocks EMI and RFI for reliable signal integrity
- Snagless moulded boots with strain relief protect connectors during installation
Cat6a LSZH shielded cable
This StarTech Cat6a cable is built for installers and network managers who need 10 Gbps performance with low-smoke zero-halogen jacketing. The S/FTP shielding protects multi-gigabit signals from EMI and RFI in dense cable runs. It meets the demands of modern 1/2.5/5/10 Gbps infrastructure. The white jacket aids visual identification in structured cabling.
Snagless RJ45 with strain relief
Molded snagless boots guard the connector latches during routing through trays, conduit or tight panels. Integrated strain reliefs prevent sharp bends at the termination points, reducing the risk of conductor fatigue over time. The shielded RJ45 plugs maintain grounding continuity through the link. This construction suits frequent moves, adds and changes in managed environments.
100 W PoE++ compliant
The cable complies with IEEE 802.3bt-2018 for Type 4 PoE, delivering up to 100 W to wireless APs, PTZ cameras or access-control hardware without separate power runs. It replaces older Cat5e or Cat6 links that cannot support multi-gigabit speeds or high-power PoE. The upgrade is justified when 10 Gbps throughput or 100 W endpoint power is required. LSZH rating satisfies plenum or riser fire-safety mandates where PVC is prohibited.
Highlights
- Supports 1/2.5/5/10 Gbps speeds for fast multi-gigabit networking
- LSZH jacket emits low smoke and zero halogen for safer fire evacuations
- Delivers up to 100 W PoE++ per IEEE 802.3bt-2018 for high-power devices
- S/FTP shielding blocks EMI and RFI for reliable signal integrity
- Snagless moulded boots with strain relief protect connectors during installation
Specifications
No published specifications for this item yet.
Questions about this item
What speeds does the Cat6a interface actually support?
The cable supports multi-gigabit speeds of 1, 2.5, 5 and 10 Gbps over its 8 ft length.
What physical space do the snagless connectors need?
Molded snagless boots add bulk around each RJ45 plug; allow extra clearance at patch panels or switch ports so the latch tab does not catch.
How do I terminate the cable for 100 W PoE++?
No termination is required; the cable arrives with RJ45 plugs already crimped. Simply plug each end into the device and the switch.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00115078BTC
In stock
