STARTECH
STARTECH NLWH7FCAT6APATCH network ethernet cable 7ft CAT6a LSZH S/FTP white
A 7 ft shielded Cat6a cable with LSZH jacket and snagless RJ45 plugs, rated for 10 Gbps and 100 W PoE++
- Supports 1/2.5/5/10 Gbps network speeds for high-bandwidth applications
- LSZH jacket emits low smoke and zero halogen fumes during fire events
- S/FTP shielding protects against EMI/RFI interference for reliable data transmission
- Snagless RJ45 boots prevent latch damage and simplify cable routing
- IEEE 802.3bt compliant for 100 W PoE++ power delivery to Type 4 devices
7 ft Cat6a LSZH S/FTP cable
This seven-foot Cat6a patch cable uses Low-Smoke Zero-Halogen jacketing and S/FTP shielding for structured wiring runs. It is built for installers and network engineers who need fire-safe materials and alien-crosstalk protection in dense cable trays. The white jacket aids visual identification in colour-coded patch panels.
Sustained 10 Gbps throughput with 100 W PoE++
The cable meets IEEE 802.3bt-2018 for 100 W Power over Ethernet, delivering full Type 4 power without voltage drop over the 7 ft length. Shielded pairs maintain signal integrity at 10 Gbps, 5 Gbps and 2.5 Gbps during continuous multi-gigabit loads, while LSZH materials limit smoke and corrosive gas emission if exposed to fire.
RJ45 snagless boots with integrated strain relief
Molded snagless boots protect the latch tabs from damage during pulls through cable managers or raised-floor tiles. Integrated strain reliefs prevent sharp bends at the termination point, preserving the 10 Gbps channel margin. The design suits rack-density limits where cables are frequently rerouted, not permanent trunk runs exceeding the 100 m channel maximum.
Highlights
- Supports 1/2.5/5/10 Gbps network speeds for high-bandwidth applications
- LSZH jacket emits low smoke and zero halogen fumes during fire events
- S/FTP shielding protects against EMI/RFI interference for reliable data transmission
- Snagless RJ45 boots prevent latch damage and simplify cable routing
- IEEE 802.3bt compliant for 100 W PoE++ power delivery to Type 4 devices
Specifications
No published specifications for this item yet.
Questions about this item
Does the 100 W PoE++ rating on this cable generate noticeable heat when it runs all day?
The cable complies with IEEE 802.3bt-2018 for 100 W PoE++ and uses LSZH materials that limit smoke and corrosive fumes, so it stays cool and safe during continuous high-power operation.
What devices must I already own to use the 2.5 Gbps and 5 Gbps speeds this Cat6a cable supports?
You need a switch, router or network card with Multi-Gigabit ports rated for 2.5 Gbps or 5 Gbps; the cable itself handles 1/2.5/5/10 Gbps links once both ends negotiate those speeds.
Will the S/FTP shielding and snagless boots on this 7 ft cable work reliably with my older Cat5e patch panel and 1 Gbps switch?
Yes — the shielded twisted-pair construction and RJ45 connectors are fully backward compatible, so the cable will negotiate 1 Gbps on legacy gear while the snagless boots protect the latch during moves.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00115015BTC
In stock
