We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White 14ft Cat6a LSZH shielded patch cable with snagless RJ45 connectors

STARTECH

STARTECH NLWH14FCAT6APATCH 14ft CAT6a LSZH network ethernet cable

SKU CH-1KH6-WB477 MPN NLWH14FCAT6APATCH

A 14 ft LSZH Cat6a patch cord rated for 10 Gbps and 100 W PoE++ with shielded, snagless RJ45 connectors

  • Supports 10 Gbps multi-gigabit speeds for high-bandwidth networks
  • LSZH jacket emits low smoke and zero halogen in fire emergencies
  • Delivers up to 100 W PoE++ power to Type 4 devices
  • S/FTP shielding blocks EMI and RFI interference on every pair
  • Snagless RJ-45 boots protect connector tabs during routing and installation

White LSZH cable for plenum and riser runs

The StarTech NLWH14FCAT6APATCH is a 14ft white Cat6a patch cord built with Low-Smoke Zero-Halogen jacketing. It suits installers who need fire-safe cabling for plenum or riser spaces where PVC is not permitted. The shielded S/FTP construction supports multi-gigabit speeds up to 10 Gbps across 1, 2.5, 5 and 10 Gbps links. Buyers needing non-LSZH jacket material or longer lengths should look elsewhere.

Shielded design limits EMI without active cooling

The S/FTP shielding and LSZH sheath provide passive protection against electromagnetic interference and crosstalk in dense cable trays. Because the cord is entirely passive, it adds no fan noise and draws no power of its own. It carries up to 100W of PoE++ current to the connected device while maintaining signal integrity. No thermal management or external power supply is required for the cable itself.

Snagless boots and strain relief ease installation

Each RJ-45 connector includes a molded snagless boot that protects the latch during pulls through conduit or around corners. Integrated strain relief prevents sharp bends at the termination point, reducing the risk of conductor fatigue. The cable meets the IEEE 802.3bt-2018 standard for Type 4 PoE devices. No software, drivers or additional accessories are bundled with this patch cord.

Highlights

  • Supports 10 Gbps multi-gigabit speeds for high-bandwidth networks
  • LSZH jacket emits low smoke and zero halogen in fire emergencies
  • Delivers up to 100 W PoE++ power to Type 4 devices
  • S/FTP shielding blocks EMI and RFI interference on every pair
  • Snagless RJ-45 boots protect connector tabs during routing and installation

Specifications

No published specifications for this item yet.

Questions about this item

How do I install the 14ft LSZH cable without damaging the RJ45 latch?

Route the cable gently; the snagless molded boots protect each RJ45 tab from catching on other cords or cabinet edges during installation.

Will the LSZH jacket or shielded pairs need replacement after a few years?

The low-smoke zero-halogen jacket and S/FTP shielding are passive; they require no scheduled replacement unless the cable is physically cut or crushed.

At what point does 100W PoE++ hit its limit on this 14ft run?

The cable meets IEEE 802.3bt-2018 for 100W PoE++ across the full 14ft length; sustained load stays within spec until the connected device draws more than 100W.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.