STARTECH
STARTECH NLBK20FCAT6APATCH 20ft network ethernet cable
A 20 ft Cat6a S/FTP cable with LSZH jacket supports 10 Gbps and 100 W PoE++ while producing low smoke in fire
- Supports 10 Gbps multi-gigabit speeds with Cat6a rating
- 20 ft length gives flexible placement for network devices
- LSZH jacket reduces toxic smoke and fumes in fire events
- S/FTP shielding blocks EMI and RFI for stable data transmission
- Snagless RJ45 boots protect connector tabs during routing and installation
20 ft LSZH Cat6a S/FTP Cable
This 20 ft Cat6a cable uses Low-Smoke Zero-Halogen jacketing and S/FTP shielding for structured wiring in commercial and residential spaces. It is suited for installers and IT teams who require plenum-safe materials and multi-gigabit throughput up to 10 Gbps.
S/FTP Shielding with LSZH Jacket
The cable combines foil-shielded twisted pairs and an overall braid screen to suppress EMI and RFI across the run. Its LSZH construction limits toxic smoke and corrosive gas release during a fire, meeting safety requirements that standard PVC cables do not satisfy.
100 W PoE++ and 10 Gbps Headroom
Certified to IEEE 802.3bt-2018, the cable delivers up to 100 W to Type 4 PoE devices such as wireless APs and PTZ cameras. It handles 1, 2.5, 5 and 10 Gbps links; runs beyond the 100 m channel limit or connections requiring unshielded patch cords fall outside its design scope.
Highlights
- Supports 10 Gbps multi-gigabit speeds with Cat6a rating
- 20 ft length gives flexible placement for network devices
- LSZH jacket reduces toxic smoke and fumes in fire events
- S/FTP shielding blocks EMI and RFI for stable data transmission
- Snagless RJ45 boots protect connector tabs during routing and installation
Specifications
No published specifications for this item yet.
Questions about this item
What does the 10Gbps rating mean once the cable is installed in a real machine?
It supports Multi-Gigabit speeds of 1, 2.5, 5 and 10Gbps, so connected devices can negotiate the highest rate they both support over the 20ft run.
What interface standard does the cable follow and what does it cap in practice?
It complies with IEEE 802.3bt-2018 for 100W PoE++, capping delivered power at 100W for Type 4 PoE devices.
What does the cable physically need to fit or mount in a rack or wall plate?
Snagless RJ45 connectors with integrated strain-relief boots prevent latch damage and sharp bends at termination points.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



