STARTECH
STARTECH NLAQ6FCAT6APATCH network ethernet cable
Shielded Cat6a cable tested to 500 MHz for reliable 10 Gigabit Ethernet connections
- Shielded S/FTP construction blocks EMI for reliable 10 Gigabit speeds
- Tested to 500 MHz bandwidth supports 10GBase-T performance
- Snagless molded RJ45 connectors protect clips from damage during routing
- Aqua colour simplifies cable identification in dense network runs
- Six-foot length suits short patch connections in racks or desks
Shielded Cat6a 10 Gigabit cable
This shielded Cat6a Ethernet cable is built for 10 Gigabit network connections. It uses S/FTP construction to protect against electromagnetic interference and noise. The aqua jacket helps identify cable runs in structured cabling environments. It suits installers who need dependable 10GBase-T performance.
Verify connector clearance and category match
Check that your switch, router or patch panel ports accept standard RJ45 connectors without clearance issues. Ensure the connected hardware supports 10GBase-T to use the full 500 MHz tested bandwidth. The snagless boots protect clips but add slight depth; confirm port spacing allows adjacent connections. This cable is not for buyers who need fibre or coaxial media.
Low heat passive operation
The cable draws no power and generates no heat or noise during normal operation. Shielding contains signal emissions without active components. Power draw is limited to the linked network devices themselves. There are no fans, pumps or moving parts to maintain.
Highlights
- Shielded S/FTP construction blocks EMI for reliable 10 Gigabit speeds
- Tested to 500 MHz bandwidth supports 10GBase-T performance
- Snagless molded RJ45 connectors protect clips from damage during routing
- Aqua colour simplifies cable identification in dense network runs
- Six-foot length suits short patch connections in racks or desks
Specifications
No published specifications for this item yet.
Questions about this item
Does the 6 ft aqua Cat6a cable come with anything else or do I need to buy connectors separately?
The cable is supplied as a single 6 ft aqua Cat6a patch lead with RJ45 plugs already fitted on both ends, so no extra connectors or accessories are required.
When should I pick the 6 ft aqua version instead of another length or colour?
Choose the 6 ft aqua cable when the run between devices is roughly six feet and you want the aqua jacket to colour-code that link in your rack or desk setup.
What does the 500 MHz rating mean when the cable is installed in a 10GBase-T network?
A 500 MHz tested bandwidth means the shielded S/FTP construction supports the full 10 Gigabit signal over the 6 ft distance without the EMI issues that can degrade throughput.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



