STARTECH
STARTECH N6PATCH25GR 25 ft Cat6 network ethernet cable
A 25-foot Cat6 patch cable with snagless connectors supports 1, 2.5, 5 and 10 Gbps up to 160 feet and 100 W PoE
- TypeConsumer Electronics
- Cat6
- Length25 ft.
- ColorGray
- FeaturesConstructed with top quality components Constructed and test
- 25 ft reach for flexible device placement
- Cat 6 rating supports 10 Gbps up to 160 ft
- 24 AWG stranded copper ensures reliable signal quality
- Snagless connectors protect tabs during frequent moves
- 100 W PoE capability powers devices through the cable
25 ft Cat6 patch cable for multi-gigabit links
This 25 ft Cat6 UTP patch cable uses 24 AWG stranded 100% copper conductors rated for 250 MHz bandwidth. It supports 1, 2.5, 5 and 10 Gbps speeds up to 160 ft, making it suitable for desktop, server or switch connections that require reliable throughput. The gray PVC jacket carries a UL rating E132276-A for safety compliance.
Snagless connectors with molded strain relief
Molded snagless connectors protect the locking tabs from catching during installation or removal in dense patch panels. Integrated strain relief near each connector reduces cable fatigue at the termination point. These features help maintain consistent contact performance over repeated plug cycles without signal degradation.
100 W PoE headroom for powered devices
The cable carries up to 100 W of Power over Ethernet, providing headroom for high-draw devices such as multi-radio access points, PTZ cameras or LED lighting fixtures. At 25 ft it stays well within the 160 ft limit for 10 Gbps operation, but runs longer than 160 ft would reduce maximum speed capability.
Highlights
- 25 ft reach for flexible device placement
- Cat 6 rating supports 10 Gbps up to 160 ft
- 24 AWG stranded copper ensures reliable signal quality
- Snagless connectors protect tabs during frequent moves
- 100 W PoE capability powers devices through the cable
Specifications
| Brand | StarTech.com |
|---|---|
| Model | N6PATCH25GR |
| Type | Consumer Electronics |
| Cat | 6 |
| Length | 25 ft. |
| Color | Gray |
| Features | Constructed with top quality components Constructed and tested, to ensure minimal Near End Crosstalk (NEXT) Molded snag-less connectors Molded strain relief prevents near connector damage Cable Jacket Type: PVC - Polyvinyl Chloride Wire Gauge: 24 AWG Fire Rating: CMG Rated (General Purpose) Cable Rating: CAT6a - 10Gbit/s Wiring Standard: TIA/EIA-568-B.1-2001 T568B Connector A: 1 - RJ45 Male Connector B: 1 - RJ45 Male |
| Shipping weight | 0.91 kg |
| Package size | 213 × 187 × 23 mm |
Questions about this item
Does the snagless boot or the 24 AWG stranded copper conductor require periodic replacement under normal use?
The cable is built with molded snagless connectors and strain relief designed to prevent damage during repeated insertion and removal, so no scheduled replacement of the boot or conductors is expected.
What throughput ceiling appears first when the link runs continuously at 5 Gbps or 10 Gbps?
The cable supports up to 10 Gbps at lengths up to 160 ft and is specified at 250 MHz bandwidth, so the 25 ft run will not hit a cable-imposed throughput limit before the connected equipment does.
How much heat or power loss occurs on the 25 ft run when delivering 100 W PoE all day?
With 24 AWG 100 % copper conductors rated for 100 W PoE, resistive heating over 25 ft is minimal and the PVC jacket remains within normal operating temperature during continuous full-power delivery.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



