We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact SFP transceiver module with matte metal housing and LC duplex port

STARTECH

STARTECH GLCLHSMDST SFP transceiver 1000BASE-LX/LH 1310nm 10km

SKU CH-2GF7-GNKZA

Connects Gigabit Ethernet over single-mode or multi-mode fiber up to 10 km with LC duplex interface and 1310 nm wavelength

  • StandardsIEEE 802.3z 1000BASE-LX / LH
  • Wavelength1310nm
  • Fiber CableSingle Mode / Multi Mode
  • ProtocolsTCP/IP
  • Ports1 - Fiber Optic LC Duplex Female
  • Max Distance10 km (6.2 mi)

Type 1 Pack

  • 1 Gbps throughput over single-mode fiber up to 10 km
  • Cisco GLC-LH-SMD compatible for hot-swap use in supported switches
  • Digital Diagnostic Monitoring reports transceiver status to SNMP tools
  • Operates from 0 °C to 70 °C in humid environments
  • MSA compliant for Ubiquiti, D-Link, Netgear and other uncoded switches

Compatible Gigabit SFP module

This StarTech.com GLCLHSMDST transceiver delivers 1.25 Gbps over single-mode or multi-mode fiber at 1310 nm. It meets IEEE 802.3z 1000BASE-LX/LH standards and reaches 10 km on single-mode cable. The LC duplex connector fits standard SFP cages and the module is fully compatible with Cisco GLC-LH-SMD equipment. Digital Diagnostic Monitoring reports transceiver health to SNMP tools.

Suited for Cisco and MSA switches

Network engineers extending campus or metro links between Cisco Firepower, ASR or IE switches will find this module a direct replacement. Builders using Ubiquiti, Netgear or other MSA-compliant gear that accepts uncoded SFPs can also deploy it. It is not suited for links longer than 10 km or for multi-mode runs that exceed the standard reach. Buyers needing 10 Gbps or 25 Gbps speeds must select a different form factor.

Deciding specification: 10 km single-mode reach

The 10 km maximum distance on single-mode fiber at 1310 nm is the figure that confirms whether this transceiver matches the link budget. Verify the patch length and fiber type before ordering. Operating temperature spans 0 °C to 70 °C with storage down to -40 °C. Humidity tolerance is 5 to 95 percent RH. Weight is 0.15 units.

Highlights

  • 1 Gbps throughput over single-mode fiber up to 10 km
  • Cisco GLC-LH-SMD compatible for hot-swap use in supported switches
  • Digital Diagnostic Monitoring reports transceiver status to SNMP tools
  • Operates from 0 °C to 70 °C in humid environments
  • MSA compliant for Ubiquiti, D-Link, Netgear and other uncoded switches

Specifications

BrandStarTech.com
ModelGLCLHSMDST
StandardsIEEE 802.3z 1000BASE-LX / LH
Wavelength1310nm
Fiber CableSingle Mode / Multi Mode
ProtocolsTCP/IP
Ports1 - Fiber Optic LC Duplex Female
Max Distance10 km (6.2 mi)
Transfer Rate1.25 Gbps
TemperatureOperating Temperature: 0 degree C to 70 degree C (32 degree F to 158 degree F)
Storage Temperature: -40 degree C to 85 degree C (-40 degree F to 185 degree F)
Humidity5~95% RH
FeatureAdd reliable and cost-efficient Gigabit Ethernet connections over single-mode / multi-mode fiber with this Mini-GBIC
Gigabit Fiber SFP Transceiver Module
Cisco GLC-LH-SMD Compatible
Meets or exceeds OEM specifications and MSA industry standards
Lifetime warranty
Maximum distance 10km / 6.2 mi. (SM) and 550m / 1804 ft. (MM)
1000Base-LX / LH
Supports Digital Diagnostics Monitoring (DDM)
Weight0.15
Shipping weight0.11 kg
Package size94 × 81 × 28 mm

Other versions of this model

1 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

How do I install the GLCLHSMDST SFP transceiver into a Cisco switch, and what step do people often miss?

Insert the module into an SFP slot until it clicks, then lock the LC duplex cables by pushing the connector until the latch engages; the step people miss is removing the dust caps from both the transceiver and the fiber ends before connecting.

What maintenance will the GLCLHSMDST transceiver need over its lifetime?

Periodically inspect and clean the LC duplex fiber connectors with a lint-free wipe and isopropyl alcohol to prevent signal loss from dust or oil; no internal components require replacement.

At what operating temperature does the GLCLHSMDST transceiver hit its thermal limit during sustained use?

The module is rated for continuous operation up to 70 °C; exceeding this temperature can cause errors or shutdown before any other limit is reached.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.