STARTECH
STARTECH DISPLPORT50L 50 ft 15.24m DisplayPort cable male to male latching 10.8 Gbps 2560x1600
A 50 ft DisplayPort cable with latching male connectors supporting 10.8 Gbps bandwidth and 2560x1600 resolution
- TypeDisplayPort Cable
- ColorBlack
- Length50 ft(15.24m)
- Cable Length50 ft.
- Connector Number2
- Connector Detail1 x DisplayPort Male to 1 x DisplayPort Male
- 50 ft reach connects distant displays
- 8 Gbps bandwidth supports 2560×1600 resolution
- Latching connectors prevent accidental disconnection
- Aluminium-Mylar foil and braid shield reduce EMI and RFI
- Built to DisplayPort standards for reliable performance
50 ft DisplayPort cable for extended reach
This 50 ft (15.24 m) male-to-male DisplayPort cable connects monitors or projectors at distances standard cables cannot cover. Latching connectors lock into place to prevent accidental disconnection during use. Shielded construction with aluminum-mylar foil and braid suppresses EMI and RFI interference. It is suited for installations where the source and display are far apart.
Latching connectors and shielding change
The latching mechanism secures each plug so vibration or cable movement does not break the link. Aluminum-mylar foil with braid shielding maintains signal integrity across the full length by blocking external noise. These features let the cable hold a stable 10.8 Gbps connection at 50 ft without degradation. No software or drivers are required for operation.
Bandwidth ceiling limits resolution at this length
Maximum bandwidth of 10.8 Gbps caps supported resolutions at 2560×1600, so 4K or higher refresh rates are not possible. DisplayPort standards do not guarantee performance beyond the rated bandwidth for this cable length. Builders needing higher resolutions or faster refresh rates must use a shorter or active cable. The passive design cannot compensate for signal loss at greater distances.
Highlights
- 50 ft reach connects distant displays
- 8 Gbps bandwidth supports 2560×1600 resolution
- Latching connectors prevent accidental disconnection
- Aluminium-Mylar foil and braid shield reduce EMI and RFI
- Built to DisplayPort standards for reliable performance
Specifications
| Brand | StarTech.com |
|---|---|
| Model | DISPLPORT50L |
| Type | DisplayPort Cable |
| Color | Black |
| Length | 50 ft(15.24m) |
| Cable Length | 50 ft. |
| Connector Number | 2 |
| Connector Detail | 1 x DisplayPort Male to 1 x DisplayPort Male |
| Terminal Gender | Male to Male |
| Features | Aluminum-Mylar Foil with Braid shield to help eliminate EMI and RFI interference and maintain signal integrity without any degradation of quality. Maximum bandwidth of 10.8Gbps and display resolutions up to 2560x1600 (WQXGA) 26 guage (AWG) pure copper wire HDCP and DPCP compliant |
| Shipping weight | 1.28 kg |
| Package size | 226 × 204 × 90 mm |
Questions about this item
Will the latching connectors on this 50 ft DisplayPort cable wear out and need replacement?
The latching connectors are designed to secure the cable against accidental disconnection and are built to DisplayPort standards for long-term reliability.
At 10.8 Gbps bandwidth, what resolution limit appears first during sustained use?
The cable supports a maximum bandwidth of 10.8 Gbps and display resolutions up to 2560x1600, which is the limiting factor for sustained performance.
Does the aluminium-mylar foil and braid shielding on this 15.24 m cable affect heat or power draw when running all day?
The shielding eliminates EMI and RFI interference to maintain signal integrity without degradation and does not increase heat or power consumption during continuous operation.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



