We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green Cat6 Ethernet cable 50 ft molded RJ45 connectors

STARTECH

STARTECH C6PATCH50GN network ethernet cable 50 ft Cat6 Green

SKU CH-D2DF-5XM19 MPN C6PATCH50GN

A 50 ft green Cat6 patch cable with RJ-45 connectors supports 10 Gbps up to 160 ft, 250 MHz bandwidth, 24 AWG copper conductors, 100 W PoE, and CMG fire rating

  • Typeothers
  • Cat6
  • Connector A1 - RJ-45 Male
  • Connector B1 - RJ-45 Male
  • Length50 ft.
  • ColorGreen
  • Supports 10 Gbps up to 160 ft with 250 MHz bandwidth
  • 24 AWG stranded 100 % copper conductors ensure reliable signal quality
  • 100 W Power-over-Ethernet capability powers devices through the cable
  • ETL verified and UL rated for safety compliance
  • 50 ft green molded Cat6 patch cord with RJ-45 connectors

Ready for multi-gigabit networking

This 50 ft Cat6 patch cable supports 1, 2.5, 5 and 10 Gbps speeds up to 160 ft at 250 MHz. It uses 24 AWG stranded 100% copper conductors arranged in four UTP pairs with T568B wiring. The green PVC jacket carries a CMG fire rating and the assembly is ETL verified with UL rated wire (E132276-A).

Power delivery under sustained load

The cable handles 100 W Power over Ethernet without overheating during continuous operation. Stranded copper construction maintains signal integrity across the full 50 ft run at 250 MHz bandwidth. Molded strain relief protects the RJ-45 contacts from fatigue when the link carries maximum PoE current for extended periods.

Straightforward installation with one caution

Both ends terminate in standard RJ-45 male plugs that snap into any 8P8C port without tools. The 50 ft length reaches between distant patch panels or wall plates in a single run. The only common issue is excess slack in tight cabinets; plan the route so the green jacket does not block airflow or snag on adjacent cables.

Highlights

  • Supports 10 Gbps up to 160 ft with 250 MHz bandwidth
  • 24 AWG stranded 100 % copper conductors ensure reliable signal quality
  • 100 W Power-over-Ethernet capability powers devices through the cable
  • ETL verified and UL rated for safety compliance
  • 50 ft green molded Cat6 patch cord with RJ-45 connectors

Specifications

BrandStarTech.com
ModelC6PATCH50GN
Typeothers
Cat6
Connector A1 - RJ-45 Male
Connector B1 - RJ-45 Male
Length50 ft.
ColorGreen
FeaturesNumber of Conductors 4 pair UTP
Cable Jacket Type PVC - Polyvinyl Chloride
Fire Rating CMG Rated (General Purpose)
Cable Type Molded
Wiring Standard TIA/EIA-568-B.1-2001 T568B
Shipping weight0.52 kg
Package size326 × 257 × 23 mm

Questions about this item

Does the 50 ft Cat6 cable generate heat or draw power during continuous use?

The cable is passive copper wiring with no active components, so it produces no heat and draws no power itself; only the connected PoE devices negotiate up to 100 W.

What equipment must I already have to use this RJ-45 patch cord?

You need two devices with standard RJ-45 Ethernet ports — such as a router, switch, PC, access point or PoE-powered camera — and no additional adapters.

Will this 250 MHz Cat6 cable work with my older Cat5e patch panel and 1 Gbps switch?

Yes, the T568B-wired cord is fully backward compatible; it will link at the highest speed both ends support, up to 1 Gbps on Cat5e hardware.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

More in Network Ethernet Cables

Similar items

Same shelf, same checkout — eight coins and a 30-minute rate lock.