We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green Cat6 crossover patch cable with molded connectors, four feet long

STARTECH

STARTECH C6PATCH4GN 4 ft network ethernet cable

SKU CH-SHTX-CFHYX MPN C6PATCH4GN

A 4 ft green Cat 6 crossover patch cable with 24 AWG stranded copper conductors rated for 250 MHz, 10 Gbps up to 160 ft and 100 W PoE

  • Typeothers
  • Cat6
  • Length4 ft
  • ColorGreen
  • FeaturesCable Configuration:Crossover Cable Features:Molded Cable Ch
  • Supports 10 Gbps speeds up to 160 ft with 250 MHz bandwidth
  • 100 W Power over Ethernet capability for powered devices
  • 24 AWG stranded 100 % copper conductors ensure reliable signal
  • Molded strain-relief boots protect connectors during repeated plugging
  • ETL verified and UL rated (E132276) for safety compliance

Green Cat 6 Patch Cable – 4 ft

This green Category 6 patch cable measures four feet and is built with 24 AWG stranded copper conductors. It is rated for 250 MHz bandwidth and supports Multi-Gigabit speeds of 1, 2.5, 5 and 10 Gbps up to 160 ft. The cable carries UL listing E132276-A and ETL verification.

Suited for short PoE runs and crossover links

Network technicians who need a short, factory-terminated crossover lead for direct device-to-device links or for PoE endpoints drawing up to 100 W will find the length and rating convenient. Installers requiring longer horizontal runs, different colour coding or straight-through pinouts should select another cable.

Crossover pinout decides fit

The single specification that determines whether this is the correct part is the crossover cable configuration; it only suits connections that demand crossed transmit and receive pairs.

Highlights

  • Supports 10 Gbps speeds up to 160 ft with 250 MHz bandwidth
  • 100 W Power over Ethernet capability for powered devices
  • 24 AWG stranded 100 % copper conductors ensure reliable signal
  • Molded strain-relief boots protect connectors during repeated plugging
  • ETL verified and UL rated (E132276) for safety compliance

Specifications

BrandStarTech.com
ModelC6PATCH4GN
Typeothers
Cat6
Length4 ft
ColorGreen
FeaturesCable Configuration:Crossover
Cable Features:Molded
Cable Characteristic:Patch Cable
Shipping weight0.07 kg
Package size210 × 193 × 24 mm

Questions about this item

Does the crossover wiring mean I need a regular straight-through cable for my router and switch ports?

Yes, the C6PATCH4GN is a crossover cable intended for direct device-to-device links; standard router and switch ports require a straight-through patch cable.

Will this Cat 6 cable work properly if I keep my older Cat 5e patch panel and wall jacks?

The cable meets Cat 6 specifications at 250 MHz and 24 AWG, so it will operate at Cat 5e speeds when connected to legacy Cat 5e components.

How can I confirm the cable is delivering the rated 10 Gbps performance after installation?

Run a link test or transfer a large file between two 10 Gbps-capable NICs; sustained throughput near 10 Gbps indicates the 250 MHz, 24 AWG stranded copper link is performing to spec.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.