We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black heavy-duty power cord with IEC C19 and C20 connectors

STARTECH

STARTECH BA162200POWERCORD 2ft 60cm IEC 60320 C19 to C20 12AWG 20A 250V computer power cord

SKU CH-MCPX-T4NPT

A 2 ft heavy-duty extension cord with IEC C19 to C20 connectors, 12 AWG copper wiring rated for 20 A at 250 V, built with UL-listed components to UL 62 and UL 817 standards

  • Designed for IT professionals by StarTech.com specialists
  • UL-listed components meet UL62 and UL817 safety standards
  • 12 AWG copper wiring tested for continuity and conductivity
  • IEC 60320 C19 to C20 connectors rated 20 A 250 V
  • REACH and RoHS compliant for reduced environmental impact

2 ft IEC C19 to C20 Extension

This 2 ft heavy-duty extension cord connects IEC 60320 C19 equipment to a C20 inlet. It is built for IT professionals who need reliable power delivery in server racks, network cabinets or high-density workstations. The short length keeps cable routing tidy in confined spaces.

Upgrade From Thinner or Longer Cords

Replacing a lighter-gauge or excessively long cord reduces voltage drop and clutter in rack environments. The jump is worth it when existing cables run hot, fail continuity tests or obstruct airflow in dense equipment bays.

20 A 250 V Capacity With 12 AWG Copper

The 12 AWG 100 % copper conductors handle continuous 20 A loads at 250 V without overheating. UL 62 and UL 817 listed components plus REACH and RoHS compliance give certified headroom for enterprise power distribution units and high-draw compute nodes.

Highlights

  • Designed for IT professionals by StarTech.com specialists
  • UL-listed components meet UL62 and UL817 safety standards
  • 12 AWG copper wiring tested for continuity and conductivity
  • IEC 60320 C19 to C20 connectors rated 20 A 250 V
  • REACH and RoHS compliant for reduced environmental impact

Specifications

No published specifications for this item yet.

Questions about this item

What clearance does the C19 connector need on the equipment side?

The IEC 60320 C19 plug requires enough rear clearance for its rectangular body and the 12 AWG cable bend radius; allow at least 50 mm behind the inlet.

How do I seat the C20 connector fully so the cord does not come loose under load?

Align the keyway, push the C20 straight into the C19 inlet until the latch clicks, then tug gently to confirm the lock is engaged.

When should I replace this cord based on the 12 AWG copper conductors?

Inspect annually; replace if the jacket shows cracking, the pins discolour, or continuity testing reveals resistance rise on the 100 % copper wires.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.