We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green heavy-duty power cord with C14 to C15 connectors, 6ft length

STARTECH

STARTECH 89154606 6ft 1.8m C14 to C15 15A 250V 14AWG Green Power Cord

SKU CH-Q7JZ-2WQ8Y

Heavy-duty 1.8 m IEC 60320 C14-to-C15 cord rated 15 A at 250 V with 14 AWG copper wiring and UL-listed components

  • Heavy-duty 14 AWG copper handles 15 A at 250 V for demanding PDU loads
  • UL-listed components meet UL 62 and UL 817 safety standards
  • IEC 60320 C14 to C15 connectors fit standard rack PDU outlets
  • 100 % copper conductors tested for continuity ensure reliable power delivery
  • RoHS and REACH compliant materials reduce environmental impact

PDU power cord for rack equipment

This 1.8 metre heavy-duty cord connects a C14 inlet to a C15 outlet, making it suitable for linking servers or network gear to a power distribution unit. The green jacket provides quick visual identification in dense cable runs. It is built for IT professionals who need reliable mains connectivity in cabinet environments.

UL-listed components and 100% copper conductors

The cable uses UL listed components that meet UL62 and UL817 compliance standards, and the wiring is tested for continuity and conductivity. REACH and RoHS adherence supports reduced environmental impact and safe disposal. Temperature chamber testing confirms reliable performance across operating conditions.

15 A 250 V rating with 14 AWG gauge

The 14 AWG conductor handles up to 15 amps at 250 volts, giving headroom for typical rackmount power supplies and PDU branches. It is not intended for loads exceeding the rated current or for connectors other than IEC 60320 C14 and C15. Builders needing higher amperage or different connector types should select an alternative cord.

Highlights

  • Heavy-duty 14 AWG copper handles 15 A at 250 V for demanding PDU loads
  • UL-listed components meet UL 62 and UL 817 safety standards
  • IEC 60320 C14 to C15 connectors fit standard rack PDU outlets
  • 100 % copper conductors tested for continuity ensure reliable power delivery
  • RoHS and REACH compliant materials reduce environmental impact

Specifications

No published specifications for this item yet.

Questions about this item

Will the 14AWG copper conductors need replacement under normal server-rack use?

The cord uses 100% copper wiring tested for continuity and conductivity, so the conductors themselves do not wear out; only physical damage to the jacket or connectors would require replacement.

What is the first limit reached when the C14-to-C15 cord runs at full 15 A 250 V load continuously?

The 15 A / 250 V rating and 14AWG gauge set the thermal ceiling; sustained operation at that current is the design limit before temperature rise becomes a concern.

How much heat does the 6 ft green cable produce when powering a PDU all day?

The 14AWG copper keeps resistive losses low, so the cord runs only slightly warm at rated load; no active cooling is needed in a ventilated rack.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.