We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 1.2 m power cord with C14 plug and locking C13 connector

STARTECH

STARTECH 87L38400POWERCORD 1.2m C14 to Locking C13 PDU Power Cord 10A 250V 18AWG

SKU CH-TFQM-KSFT4

A 1.2 m extension cord with a C14 plug and a locking C13 connector rated at 10 A, 250 V and 18 AWG for secure PDU connections

  • Locking C13 connector prevents accidental disconnection in rack environments
  • 2 metre length fits standard PDU-to-server distances
  • 18 AWG copper conductors tested for continuity and conductivity
  • UL-listed components meeting UL 62 and UL 817 safety standards
  • REACH and RoHS compliant for reduced environmental impact

Locking C13 PDU Power Cord

This 1.2 metre cord connects a C14 inlet to a locking IEC 60320 C13 outlet for secure PDU or rack power distribution. It is built with 18 AWG copper conductors rated at 10 amps and 250 volts for reliable equipment supply.

Suits rack installs needing vibration-proof

The locking C13 connector prevents accidental disconnection in dense cabinets or high-vibration environments. Buyers who need a standard non-locking C13 end or a different cable length should look at alternative cords.

Handles 10 A continuous load on 18 AWG copper

The cord is manufactured with UL listed components meeting UL 62 and UL 817 standards and is tested for continuity and conductivity. It runs out of headroom above the 10 A rating or when a non-locking connector is required.

Highlights

  • Locking C13 connector prevents accidental disconnection in rack environments
  • 2 metre length fits standard PDU-to-server distances
  • 18 AWG copper conductors tested for continuity and conductivity
  • UL-listed components meeting UL 62 and UL 817 safety standards
  • REACH and RoHS compliant for reduced environmental impact

Specifications

No published specifications for this item yet.

Questions about this item

What type of outlet does the C14 plug on this cord fit?

The C14 connector fits a standard IEC 60320 C13 outlet, commonly found on PDUs, UPS units, and server power supplies.

Will the locking C13 connector stay secure on my older C14 inlet?

Yes, the locking C13 end mates with any standard IEC 60320 C14 inlet; the latch adds retention but does not change the physical interface.

How can I confirm the cord is carrying power after I connect it?

Verify the equipment powers on normally and check that the connector latch is fully engaged; the cord uses 100% copper wiring tested for continuity.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.