We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black Y-splitter power cable IEC C14 plug to two C13 sockets 1.8m length

STARTECH

STARTECH 87238600POWERCORD computer power cord

SKU CH-WMK9-FVGS3 MPN 87238600POWERCORD

Splits one C14 inlet into two C13 outlets, delivering 10 A at 250 V over 1.8 m of 18 AWG copper with UL-listed components

  • Splits one C14 inlet into two C13 outlets
  • 8 m length suits rack or desk layouts
  • 18 AWG copper conductors deliver 10 A at 250 V
  • UL 62 and UL 817 listed components confirm safety compliance
  • REACH and RoHS directives reduce environmental impact

IEC C14 to dual C13 splitter

This six-foot cable splits a single IEC 60320 C14 inlet into two C13 outlets. It lets one PDU or UPS receptacle power two servers, switches or storage units. The 18AWG copper conductors are rated for 10 A at 250 V. Builders who need more than two branches or a different inlet type cannot use this cord.

UL-listed components under continuous load

The assembly uses UL-listed components that meet UL62 and UL817 requirements. Temperature-chamber testing confirms the insulation and connectors remain stable during sustained 10 A operation. Continuity-checked copper wiring prevents hot-spots when both branches draw current simultaneously. Installations requiring a higher amperage rating must select a different cable.

1.8-metre length fixes rack placement

At 1.8 m the cord reaches from a floor-mounted PDU to mid-rack equipment without excess slack. The fixed length cannot be shortened or extended, so measure the exact path before ordering. Runs that exceed this distance or need slack management will require a longer or shorter alternative.

Highlights

  • Splits one C14 inlet into two C13 outlets
  • 8 m length suits rack or desk layouts
  • 18 AWG copper conductors deliver 10 A at 250 V
  • UL 62 and UL 817 listed components confirm safety compliance
  • REACH and RoHS directives reduce environmental impact

Specifications

No published specifications for this item yet.

Questions about this item

Does the 18AWG cable run warm when two devices draw close to the 10A rating?

The 18AWG copper conductors are UL listed and tested for continuity, so they handle the rated 10A at 250V without excessive heat under normal operation.

What connectors must my equipment already have to use this splitter?

Your power source needs a C14 inlet and each device must accept a C13 plug, matching the IEC 60320 C14 to dual C13 layout.

Will the 1.8m length reach older rack gear that uses the same IEC connectors?

Yes, the 1.8m cord uses standard IEC 60320 C14 and C13 ends, so it fits legacy equipment that shares those connector types.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.