We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 1ft C14 to C13 power cord with moulded connectors

STARTECH

STARTECH 87138100POWERCORD 1ft 0.3m C14 to C13 10A 250V 18AWG computer power cord

SKU CH-N88M-Z4M4K

Short 0.3 m C14-to-C13 extension cord rated 10 A at 250 V using 18 AWG copper conductors built from UL-listed components meeting UL62 and UL817

  • Short 0.3 m length keeps rack wiring tidy
  • C14 to C13 connectors fit standard PDU and server ports
  • 10 A 250 V rating handles typical IT equipment loads
  • 18 AWG all-copper conductors tested for continuity
  • UL listed components meeting UL62 and UL817 standards

Professional IT Power Cord

The StarTech 87138100POWERCORD connects C14 PDU or UPS outlets to C13 equipment inlets. It serves system administrators, data-centre technicians and office IT staff who need short, reliable links between rack-mounted power distribution and servers, switches or storage arrays.

Tool-less Installation

The moulded IEC 60320 C14 and C13 connectors push firmly into standard ports without tools. The 0.3 metre length reduces cable clutter but leaves no slack for mis-aligned outlets; verify port spacing before ordering. UL listed components satisfy UL62 and UL817, while REACH and RoHS compliance covers environmental regulations.

10A 250V Capacity

Rated at 10 amps and 250 volts with 18AWG 100% copper conductors, the cord handles typical single-PSU servers and network gear. It is not suited for high-current blades, GPU-dense nodes or any device drawing above 10A; such loads require heavier-gauge cable. Lifetime backing and 24/5 technical support accompany every unit.

Highlights

  • Short 0.3 m length keeps rack wiring tidy
  • C14 to C13 connectors fit standard PDU and server ports
  • 10 A 250 V rating handles typical IT equipment loads
  • 18 AWG all-copper conductors tested for continuity
  • UL listed components meeting UL62 and UL817 standards

Specifications

No published specifications for this item yet.

Questions about this item

How do I confirm the 10 A 250 V cord is working after connecting it between a C14 outlet and a C13 device?

Verify the equipment powers on normally; the cord uses 100 % copper wiring tested for continuity and conductivity and is built from UL listed components meeting UL62 and UL817.

What comes in the box with the 87138100POWERCORD and is anything else required?

The package contains the 1 ft 0.3 m C14 to C13 power cord; no additional parts are needed to connect a C14 PDU or UPS outlet to a C13 inlet.

Which version of this cord should I choose for a standard 10 A 250 V rack connection?

This model is an 18 AWG 1 ft 0.3 m C14 to C13 cord rated 10 A 250 V with UL listed components, suitable for typical PDU-to-device links.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.