STARTECH
STARTECH 4K70IC-EXTEND-HDMI 4K 60Hz HDMI Extender 70m v extender
Extends 4K 60Hz HDMI up to 70 m over a single CAT5e/6 cable with PoC power and IR control
- Extender & Repeater TypeNon Wall Plate Extender
- ColorBlack
- Other ConnectorLocal Unit Connectors 1 - HDMI 1 - HDMI 1 - RJ-45 1 - Barrel
- Software ApplicationSoftware: OS Compatibility No Drivers or Software Required
- LED Indicator1 - Flashing Blue: Power connected, but no HDMI input signal
- Power Consumption0.1W
- 4K 60Hz HDR video reaches 70m over one CAT5e/6 cable
- Zero-latency 4:4:4 chroma keeps colour accuracy intact at distance
- Power-over-Cable runs both units from a single 12V adapter
- IR blaster and receiver let you control the source from the display end
- Transmitter HDMI loop-out adds a local screen or chains another extender
4K 60Hz HDMI Extender over CAT5e/6
This StarTech.com 4K70IC-EXTEND-HDMI kit transmits 4K 60Hz video and 7.1-channel audio up to 70 metres over a single Category 5e or 6 cable. The transmitter and receiver units form a complete point-to-point link with zero latency and HDCP 2.2 compliance. Power-over-Cable supplies the remote unit from the local power adapter, removing the need for a second outlet. Installation is driver-free and includes IR extension for remote source control.
Integrators needing long 4K runs without fibre
The extender suits digital-signage deployments in malls, stadiums or hospitals where a 230-foot CAT5e/6 run replaces costly HDMI cable. It also fits home-theatre installs that must bridge rooms without an equipment rack nearby. Users who require distances beyond 70 metres, fibre-based transmission, or HDMI 2.1 features such as 4K 120Hz should evaluate alternative technologies.
Handles 4K 60Hz 4:4:4 and common lower resolutions
Supported modes include 3840×2160 at 60 Hz, 2560×1600 at 60 Hz, 1920×1200 at 60 Hz, 1080p and 720p. The local HDMI loop-through allows a second display or cascaded extenders for longer chains. Bandwidth tops out at the HDMI 2.0 limit, so 4K 120 Hz, 8K or variable-refresh-rate signals will not pass.
Highlights
- 4K 60Hz HDR video reaches 70m over one CAT5e/6 cable
- Zero-latency 4:4:4 chroma keeps colour accuracy intact at distance
- Power-over-Cable runs both units from a single 12V adapter
- IR blaster and receiver let you control the source from the display end
- Transmitter HDMI loop-out adds a local screen or chains another extender
Specifications
| Brand | StarTech.com |
|---|---|
| Model | 4K70IC-EXTEND-HDMI |
| Part Number | 4K70IC-EXTEND-HDMI |
| Extender & Repeater Type | Non Wall Plate Extender |
| Color | Black |
| Other Connector | Local Unit Connectors 1 - HDMI 1 - HDMI 1 - RJ-45 1 - Barrel Power Connector (Size M, OD:5.50, ID: 2.10) 1 - 3.5mm Stereo Female 3 pos Remote Unit Connectors 1 - HDMI 1 - 3.5mm Stereo Female 3 pos 1 - Toslink (SPDIF, Optical) 1 - Barrel Power Connector (Size M, OD:5.50, ID: 2.10) 1 - RJ-45 |
| Software Application | Software: OS Compatibility No Drivers or Software Required |
| LED Indicator | 1 - Flashing Blue: Power connected, but no HDMI input signal is detected Solid Blue: Power connected, and a HDMI input signal is detected |
| Power Consumption | 0.1W |
| Power Supply | Power Source AC Adapter Included Input Voltage 100 - 240 AC Input Current 0.3A Output Voltage 12V DC Output Current 1A Center Tip Polarity Positive Plug Type M |
| Specification | Max Distance 70m [230ft] Maximum Digital Resolutions 3840x2160 @ 60Hz Supported Resolutions 3840x2160 (4K) @ 60Hz 2560x1600 @ 60Hz 1920x1200 @ 60Hz 1920x1080 (1080p) 1280x720 (720p) *Other resolutions and refresh rates may be available Wide Screen Supported Yes Audio Specifications HDMI - 7.1 Channel Audio Hardware: Cabling Cat 5e UTP or better Audio Yes Rack-Mountable No Daisy-Chain Yes Environmental: Operating Temperature -20°C to 60°C (-4°F to 140°F) Storage Temperature -30°C to 70°C (-22°F to 158°F) Humidity 0% - 90% RH (non-condensing) Warranty: 2 Years |
| Dimensions | Product Length 4.2 in [10.6 cm] Product Width 3.9 in [9.9 cm] Product Height 1.0 in [2.6 cm] Package Length 7.2 in [18.2 cm] Package Width 9.4 in [24.0 cm] Package Height 3.3 in [8.3 cm] |
| Weight | Weight of Product 7.4 oz [210.0 g] Shipping (Package) Weight 2.0 lb [0.9 kg] |
| Package Content | 1 - Local HDMI Transmitter Unit 1 - Remote HDMI Receiver Unit 1 - IR Blaster 1 - IR Receiver 8 - Rubber Feet 1 - Mounting Kit 1 - Power Adapter 1 - Quick-Start Guide |
| Shipping weight | 0.91 kg |
| Package size | 239 × 180 × 81 mm |
Questions about this item
What type of Ethernet cable is required to reach the 70m distance?
A single Category 5e or Category 6 cable carries the 4K 60Hz signal up to 70m between the transmitter and receiver units.
Can I connect a local display to the transmitter while extending to the remote receiver?
Yes, the transmitter includes an HDMI output for a local display or for cascading additional extenders alongside the remote connection.
How do the LED indicators confirm the link is active after setup?
A solid blue LED on the unit shows power is connected and an HDMI input signal is detected, confirming the link is working.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



