We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Red CAT6a Ethernet cable, 15 feet long, snagless RJ45 connectors, shielded S/FTP jacket

STARTECH

STARTECH 15ft Red CAT6a Snagless RJ45 10G 100W PoE S/FTP LSZH 27AWG 500MHz Shielded Network Ethernet Cable

SKU CH-RFHJ-C0WT0

A 15 ft red CAT6a patch cord with snagless RJ45 plugs, S/FTP shielding, LSZH jacket and 27 AWG pure copper conductors rated for 10 Gbps, 500 MHz and 100 W PoE

  • Supports 10 Gbps networking with 500 MHz bandwidth
  • Snagless RJ45 connectors protect tabs during installation
  • 100 W PoE capability powers devices through the cable
  • S/FTP shielding reduces interference in dense environments
  • 15 ft red LSZH jacket aids cable identification

15ft Red CAT6a Snagless Cable

This 15ft red CAT6a cable uses pure bare copper conductors with S/FTP shielding and an LSZH jacket. Snagless RJ45 connectors protect the latch during installation. It is rated for 10Gbps at 500MHz and supports 100W PoE delivery. The 27AWG gauge keeps the cable flexible for tight routing.

Suited for 10GBASE-T and high-power PoE

Network engineers running 10GBASE-T links or powering high-wattage access points and cameras will use the 100W PoE headroom and 500MHz bandwidth. Buyers who need longer runs beyond 15ft or a different jacket rating should look at other options. The snagless boots simplify moves in dense patch panels.

500MHz bandwidth and 100W PoE rating

The 500MHz swept-frequency rating confirms the cable meets CAT6a performance for 10GBASE-T up to its 15ft length. The 100W PoE capability is the single spec that decides whether this cord can handle the powered device you are connecting. Verify your switch port budget matches the load.

Highlights

  • Supports 10 Gbps networking with 500 MHz bandwidth
  • Snagless RJ45 connectors protect tabs during installation
  • 100 W PoE capability powers devices through the cable
  • S/FTP shielding reduces interference in dense environments
  • 15 ft red LSZH jacket aids cable identification

Specifications

No published specifications for this item yet.

Questions about this item

What bandwidth and speed does the 500 MHz CAT6a cable actually deliver?

The cable is rated for 500 MHz bandwidth and supports 10 Gbps 10GBASE-T Ethernet.

Will the snagless RJ45 connectors and 27 AWG stranded conductors fit a standard keystone jack or patch panel?

The snagless RJ45 plugs match standard 8P8C ports and the 27 AWG stranded wire is flexible for dense patch panels.

How do I terminate or ground the S/FTP shield on this pre-terminated patch cord?

No termination is needed; the shield is factory-bonded to the metal RJ45 shells and grounds automatically when plugged into a shielded port.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.