We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small silver SFP+ transceiver module with LC duplex port and black bail latch

STARTECH

STARTECH 10G-SFPP-SR-ST 10 Gbps SFP+ transceiver 850 nm LC 200 m

SKU CH-3Y2K-QFXPX MPN 10G-SFPP-SR-ST

10 Gbps SFP+ transceiver with LC connector for 850 nm multi-mode fibre up to 200 m, hot-swappable and Brocade compatible

  • Device TypeTransceiver
  • Wavelength850nm
  • Fiber CableMulti Mode Fiber
  • PortsLC
  • Max Distance200 m (656 ft)
  • Transfer Rate10 Gbps
  • 10 Gbps throughput for high-speed networking
  • 850 nm wavelength over multi-mode fiber
  • LC duplex connector for standard patch cables
  • Up to 200 m reach on OM3/OM4 fiber
  • Hot-swappable SFP+ design enables live upgrades

Brocade-compatible 10 Gbps SFP+ transceiver

The STARTECH 10G-SFPP-SR-ST is a hot-swappable SFP+ module built for Brocade switches and routers. It provides 10 GbE connectivity over multi-mode fibre with an LC interface at 850 nm wavelength. Digital diagnostics monitoring is included for link health visibility.

Network teams needing Brocade-validated 10GBase-SR

This module suits administrators who require a Brocade 10G-SFPP-SR compatible transceiver for distances up to 200 m on multi-mode fibre. It is not for buyers who need single-mode reach, 1 Gbps SFP speeds, or compatibility with non-Brocade vendor equipment.

Single transceiver in the package

The box contains one SFP+ transceiver only; no fibre patch cables, cleaning tools or mounting hardware are bundled. Installation relies on the host device's standard SFP+ cage and the customer's existing LC duplex cabling.

Highlights

  • 10 Gbps throughput for high-speed networking
  • 850 nm wavelength over multi-mode fiber
  • LC duplex connector for standard patch cables
  • Up to 200 m reach on OM3/OM4 fiber
  • Hot-swappable SFP+ design enables live upgrades

Specifications

BrandStarTech.com
Model10G-SFPP-SR-ST
Device TypeTransceiver
Wavelength850nm
Fiber CableMulti Mode Fiber
PortsLC
Max Distance200 m (656 ft)
Transfer Rate10 Gbps
FeatureThe 10G-SFPP-SR-ST is a Brocade 10G-SFPP-SR compatible fiber transceiver module that has been designed, programmed and tested to work with Brocade brand switches and routers. It delivers dependable 10 GbE connectivity over fiber cable, for 10GBase-SR compliant networks, with a maximum distance of up to 200 m (656 ft).
This SFP+ fiber module is hot-swappable, making upgrades and replacements seamless by minimizing network disruptions.
Technical Specifications:
Wavelength: 850nm
Maximum Data Transfer Rate: 10 Gbps
Type: Multi Mode Fiber
Connection Type: LC Connector
Maximum Transfer Di
Dimensions0.50" x 2.30" x 0.55"
Weight0.71 oz.
Package Contents1 - SFP+ Transceiver
Shipping weight0.05 kg
Package size115 × 90 × 31 mm

Questions about this item

What type of switch or router is required for this Brocade-compatible 10G-SFPP-SR-ST module to operate?

It is designed, programmed and tested for Brocade brand switches and routers that accept SFP+ transceivers and support 10GBase-SR over multi-mode fiber.

Can this 850 nm LC transceiver link with older 1 Gbps SFP ports on the same fiber run?

No, the module runs at 10 Gbps and follows 10GBase-SR; it will not negotiate down to 1 Gbps on legacy SFP ports.

How do I verify the link is healthy after inserting the module?

Check that the port shows a 10 Gbps link light, then use the switch CLI to read DDM values — temperature, voltage, Tx/Rx power — which this module reports digitally.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.