Standard Abrasives
Standard Abrasives 713199 abrasive roll 1 in x 150 ft P180 maroon
A 1-inch by 150-foot maroon coated abrasive roll with P180 grit and J-weight cloth backing for hand sanding and finishing tasks
- TypeBroaches
- P180 grit prepares surfaces for finishing
- 150-foot roll supplies long production runs
- One-inch width fits tight contours
- Aluminum oxide cloth resists coolants, oil and water
- J-weight backing conforms to irregular shapes
Utility roll for metal finishing
This 150 ft abrasive roll uses aluminum oxide on a J-weight cloth backing to deburr, blend and finish metal surfaces. The P180 grit leaves a consistent scratch pattern suitable for prep before coating or light stock removal. Mechanics and fabricators keep it on hand for quick touch-ups and longer production runs.
Easy to cut and mount
The roll format lets you tear off the exact length needed and wrap it on a hand pad, file shoe or powered drum. Cloth backing resists tearing when wrapped around tight radii. Coolant, oil and water resistance prevents the adhesive bond from breaking down during wet sanding.
Cloth-backed coated abrasive limits
Cloth-backed rolls load faster than open-mesh alternatives when used on soft aluminium or gummy steels. The J-weight backing offers less edge durability than heavier X-weight cloth on aggressive machine strokes. Grit P180 is too fine for rapid stock removal or heavy scale.
Highlights
- P180 grit prepares surfaces for finishing
- 150-foot roll supplies long production runs
- One-inch width fits tight contours
- Aluminum oxide cloth resists coolants, oil and water
- J-weight backing conforms to irregular shapes
Specifications
| Brand | STANDARD ABRASIVES |
|---|---|
| Type | Broaches |
Questions about this item
How do I know the P180 grit roll is cutting as intended after I mount it?
The aluminum-oxide coating should produce a consistent, cool cut on metal without loading; if the surface stays uniform and the cloth backing shows even wear, the roll is performing correctly.
What comes in the box and what must I supply separately?
The package contains one 1 in x 150 ft maroon abrasive roll, Series 3500-2; you will need a compatible mandrel or holder and any coolant or lubricant you prefer.
Which version of the 3500-2 roll should I choose for general deburring?
The P180 grit, J-weight cloth backing and maroon aluminum-oxide material are the single specification offered under part 713199, so that version is the one to use.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
