Standard Abrasives
Standard Abrasives 713095 Abrasive Roll 1 in x 150 ft P120 Maroon
Maroon cloth-backed aluminum oxide roll, 1 in wide by 150 ft long, P120 grit for general sanding and finishing tasks
- TypeBroaches
- P120 grit produces smooth finishes on wood and metal
- 150-foot roll supplies long runs without frequent changes
- One-inch width fits detail sanders and hand blocks
- Cloth backing resists coolants, oil and water for durability
- Maroon colour identifies grade quickly in busy workshops
Utility Roll for Hand Sanding
This 150 ft roll of P120 coated abrasive uses aluminium oxide on a J-weight cloth backing. The maroon colour identifies the grit and series. It is suited for hand finishing, deburring and light material removal on metal or wood surfaces in workshop or automotive tasks.
Replaces Cut Sheets and Narrow Strips
A continuous roll lets you tear exact lengths, reducing waste compared to pre-cut sheets. The jump is worth it when you need consistent grit across long sessions or irregular shapes. The 3500-2 series construction resists coolants, oil and water for longer life in wet conditions.
Limited to Hand-Held and Small-Drum Use
The 1 in width and flexible cloth backing suit hand sanding blocks, small-drum sanders or rotary mandrels. It is not designed for wide-belt machines or high-speed floor equipment. Buyers needing wider coverage or heavier backing weights should select a different format.
Highlights
- P120 grit produces smooth finishes on wood and metal
- 150-foot roll supplies long runs without frequent changes
- One-inch width fits detail sanders and hand blocks
- Cloth backing resists coolants, oil and water for durability
- Maroon colour identifies grade quickly in busy workshops
Specifications
| Brand | STANDARD ABRASIVES |
|---|---|
| Type | Broaches |
Questions about this item
Will the 1 in width fit my hand sander clamp?
The roll is 1 in wide and 150 ft long, so you can cut strips to match any clamp that accepts a 1 in abrasive.
How do I load the roll without tearing the cloth backing?
Pull the required length, crease sharply against a straight edge, then tear across the 1 in width; the J-weight cloth resists fraying if torn cleanly.
When should I replace the P120 grit surface?
Replace the strip once the maroon aluminum oxide dulls and no longer cuts cleanly through coolant, oil or water residue.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
