StanceMagic
StanceMagic 7mm Hubcentric Wheel Spacers 5x120 72.6mm with Black Lug Bolts 12x1.5 30mm Shank
Two 7 mm hub-centric wheel spacers with ten 12×1.5 cone-seat lug bolts for 5×120 BMW fitments
- Hubcentric design centres wheel on 72.6mm hub bore
- 7mm thickness adds clearance without excessive offset change
- Aerospace billet aluminium machined for precise fit
- Includes ten 12x1.5 cone-seat lug bolts with 30mm shank
- Fits listed BMW models with 5x120 bolt pattern
What these spacers are and who they suit
This kit supplies two 7 mm hub-centric wheel spacers machined from aerospace billet aluminium with an anodised finish. They are made for vehicles that run a 5x120 bolt pattern and a 72.6 mm centre bore using 12x1.5 cone-seat bolts. The set includes ten extended lug bolts with a 30 mm shank length so the wheels can be secured properly through the extra thickness.
How they fit into the assembly
Each spacer sits directly on the hub without a lip, so the wheel centres on the vehicle’s hub lip provided that lip exceeds 7 mm in height. Buyers must confirm their wheels accept cone-seat bolts and that at least 7 mm of clearance exists between the fender and the tyre sidewall. The spacers are not suitable for 7-Series models, SUVs or newer 2010+ F-chassis BMWs even if the bolt pattern appears to match.
Thermal noise and power behaviour
As passive aluminium components the spacers generate no heat, draw no power and produce no noise of their own. They simply transfer existing wheel loads through the hub-centric bore and the extended bolts. Correct torque on the supplied 12x1.5 hardware ensures the assembly remains stable under normal driving conditions without introducing vibration or additional thermal load.
Highlights
- Hubcentric design centres wheel on 72.6mm hub bore
- 7mm thickness adds clearance without excessive offset change
- Aerospace billet aluminium machined for precise fit
- Includes ten 12x1.5 cone-seat lug bolts with 30mm shank
- Fits listed BMW models with 5x120 bolt pattern
Specifications
| Brand | StanceMagic |
|---|
Questions about this item
Will the 7mm thickness leave enough clearance between my fender and wheel?
You need at least 7mm of space between the fender and the wheel or tyre before fitting these spacers.
Do the spacers run hot or make noise during daily driving?
The CNC-machined aluminium spacers have no moving parts, so they produce no noise and generate no measurable heat under normal use.
Must my wheels accept 12x1.5 cone-seat bolts to use the included hardware?
Yes, the kit includes ten 12x1.5 cone-seat lug bolts with a 30mm shank; your wheels must be drilled for cone-seat fitment.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
