We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two thin silver metal rings with five bolt holes and a raised centre lip

StanceMagic

StanceMagic 3mm Hubcentric 5x114.3 Wheel Spacers 67.1mm Bore (2 Pack)

SKU CH-6R9H-W3CGA

Two 3 mm hub-centric spacers with a 5x114.3 bolt pattern and 67.1 mm centre bore to widen the track on compatible Mazda, Hyundai, Genesis, Kia, Mitsubishi and Jeep models

  • Hubcentric 67.1 mm bore centres the wheel precisely
  • 3 mm thickness adds minimal track width
  • 5×114.3 bolt pattern matches listed vehicles
  • Flat no-lip design fits hubs with lip over 3 mm
  • Two spacers per pack for one axle

StanceMagic 3mm Hubcentric Spacers

These 3mm hubcentric wheel spacers use a 5x114.3 bolt pattern and a 67.1mm centre bore to fit select Mazda, Hyundai, Genesis, Mitsubishi, Kia and Jeep models. They are sold as a pair for drivers who need a slight increase in track width or clearance for brake components.

Bolt pattern and bore constraints

The 5x114.3 pattern and 67.1mm bore limit fitment to wheels and hubs matching those exact dimensions. Buyers must confirm 3mm of fender-to-tyre clearance and verify that existing studs provide safe thread engagement after installation. Extended lug bolts or studs are not included and may be required.

Flat hubcentric design implications

The flat, lipless design centres the wheel on the hub lip provided the hub protrudes more than 3mm. This demands precise hub measurements during fitting. Without a lip, the spacer relies entirely on the hub-centric interface, so correct torque sequence and hardware length are critical for daily reliability.

Highlights

  • Hubcentric 67.1 mm bore centres the wheel precisely
  • 3 mm thickness adds minimal track width
  • 5×114.3 bolt pattern matches listed vehicles
  • Flat no-lip design fits hubs with lip over 3 mm
  • Two spacers per pack for one axle

Specifications

BrandStanceMagic

Questions about this item

Should I choose the 3 mm thickness or a different size?

These spacers are 3 mm thick each; select this thickness only if you have at least 3 mm of clearance between the fender and the wheel or tyre and if your hub lip exceeds 3 mm so the wheel centres correctly.

What does the 3 mm thickness mean once the spacer is on the car?

It moves the wheel outward by 3 mm per side, giving a slightly wider track while requiring that your existing studs or bolts still provide full thread engagement after the spacer is installed.

How does the 5x114.3 bolt pattern limit fitment?

The spacer only fits hubs with a 5x114.3 (5x4.5") bolt pattern and a 67.1 mm centre bore; any vehicle with a different pattern or bore cannot use this spacer.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.