Peerless Industrial Group
Peerless Industrial Group Tire Chains Single Bus & RV V-Bar PK2 QG2821
$67.99
0.0008145BTC
In stock
StanceMagic
StanceMagic 10pcs Extended Black Lug Bolts 14x1.5 37mm Ball Seat R12
Set of 10 black extended lug bolts with 14x1.5 thread, 37mm shank and R12 ball seat for spacer fitment
- ColorBlack
- Pack of 10 bolts covers a full wheel set
- 14x1.5 thread size fits many Audi and VW hubs
- Ball seat R12 profile matches compatible wheel seats
- 37 mm shank length designed for spacer applications
- Cold-forged steel with zinc coating resists corrosion
Extended Black Lug Bolts for Spacer Fitment
This pack supplies ten black lug bolts with a 14x1.5 thread and a Ball Seat R12 profile. The 37 mm shank length is longer than original equipment bolts and is intended for use with wheel spacers. Cold-forged steel construction, precision threads, zinc coating and additional heat treatment provide corrosion resistance and strength.
Spacer-Dependent Length and Seat Verification
Because these bolts are not OEM length, the correct fit depends on your original bolt length plus the spacer thickness. The ball-seat radius must match the wheel’s seat exactly. Installers must achieve five to eight full turns before final torque to ensure secure engagement.
Pre-Installation Measurement Checklist
Verify your vehicle’s factory bolt thread size, seat type and original shank length before ordering. Measure the spacer thickness to confirm the 37 mm shank will provide sufficient thread engagement without contacting brake components. Do not install if the combined stack-up cannot deliver the required turn count.
Highlights
- Pack of 10 bolts covers a full wheel set
- 14x1.5 thread size fits many Audi and VW hubs
- Ball seat R12 profile matches compatible wheel seats
- 37 mm shank length designed for spacer applications
- Cold-forged steel with zinc coating resists corrosion
Specifications
| Brand | StanceMagic |
|---|---|
| Color | Black |
Questions about this item
How often should the zinc coating on these 14x1.5 lug bolts be inspected for corrosion?
The zinc coating provides corrosion resistance; inspect the bolts whenever wheels are removed or at each tyre rotation to catch any coating damage early.
What limits how long these 37 mm shank bolts can stay torqued under daily driving?
The 37 mm shank length must match spacer thickness; if the spacer is too thin the bolt will not achieve the required 5 to 8 full turns, and if too thick it may contact brake parts.
Do the cold-forged steel bolts generate noticeable heat during extended highway runs?
The bolts themselves do not generate heat; they simply transfer clamping force, so any temperature rise comes from the brakes and hubs, not from the bolts.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
