We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
STA-RITE Max-E-Pro 1HP pool pump motor kit with GO-KIT-79

STA-RITE

STA-RITE Max-E-Pro 1HP P6RA6E-205L Replacement Motor Kit with GO-KIT-79

SKU CH-5CXG-KRDC2

A 1 HP single-speed pool pump motor running at 3450 RPM on 115/230 volts with a threaded shaft and GO-KIT-79 included

  • TypePool Pump Motors
  • Single-speed operation simplifies pool pump control
  • Dual-voltage 115/230 V design fits existing wiring
  • 25 service factor handles peak loads reliably
  • Threaded 48Y frame shaft ensures secure impeller fit
  • 3450 RPM at 60 Hz delivers consistent water flow

Replacement Motor Kit for Max-E-Pro Pumps

The STA-RITE Max-E-Pro 1HP P6RA6E-205L Replacement Motor Kit is built for pool owners who need to restore a failed pump motor. It suits residential pools that use a compatible Max-E-Pro pump housing. It is not for buyers who want a variable-speed motor or a complete pump assembly with a new wet end.

Electrical Specifications and Frame Fit

The motor runs on 115/230 Volts and draws 15.3/7.6 Max Amps at 3450 RPM. It uses a 48Y frame with a threaded shaft and a 1.25 service factor. These figures must match the original motor data plate exactly; a different voltage, frame or shaft type will prevent correct installation.

Installation Notes and Common Issues

The kit includes the GO-KIT-79 seal package so the mechanical seal and gaskets are replaced at the same time. Wiring must be configured for the chosen voltage before power is applied. Incorrect voltage selection or reusing old seals are the most frequent causes of early failure or leaks.

Highlights

  • Single-speed operation simplifies pool pump control
  • Dual-voltage 115/230 V design fits existing wiring
  • 25 service factor handles peak loads reliably
  • Threaded 48Y frame shaft ensures secure impeller fit
  • 3450 RPM at 60 Hz delivers consistent water flow

Specifications

TypePool Pump Motors

Questions about this item

What does the 1.25 service factor mean for daily pool-pump operation?

The 1.25 service factor lets the motor handle short overloads up to 25 % above its nameplate rating without overheating, giving extra margin during heavy debris loads or voltage dips.

How does the dual-voltage 115/230 V design affect wiring and amp draw?

The motor runs on either 115 V at 15.3 A max or 230 V at 7.6 A max; choose the voltage that matches your supply and size the breaker and wire gauge accordingly.

Will the 48Y frame and threaded shaft bolt straight onto my existing Max-E-Pro pump housing?

Yes — the 48Y frame and threaded shaft are the direct mechanical match for the Max-E-Pro wet end, so the kit drops in without adapter brackets or shaft modifications.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.