We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Yellow nylon insulated fork terminal with tin-plated copper barrel and #10 stud opening

Sta-Kon

Sta-Kon RC10-10FS Fork Terminal #10 Stud 10 AWG 600 V Nylon Insulated

SKU CH-YES4-NDT9B

Nylon-insulated fork terminal for 10 AWG wire with a #10 stud, rated 600 V and 221 °F, tin-plated copper barrel

  • TypeElectrical Connectors
  • Tin-plated copper ensures reliable conductivity
  • 10 AWG capacity handles heavy-gauge wiring
  • 600 V rating supports industrial power circuits
  • Nylon insulation withstands 221 °F operating heat
  • Brazed seam resists separation under vibration

10 AWG Fork Terminal for #10 Stud

The Sta-Kon RC10-10FS is a nylon-insulated fork terminal rated for 600 V and 10 AWG copper wire. It suits electrical and automotive wiring tasks where a secure crimp connection to a #10 stud is required. The yellow insulation indicates the wire gauge range and provides partial coverage with a 221 Degrees F temperature rating.

Crimp Installation with Insulation Grip

Installation uses a standard crimp tool on the brazed-seam barrel, which includes an insulation grip to relieve strain on the wire. The barrel length is .48 in and the tongue length is .42 in, so verify stud alignment before crimping. A common issue is insufficient crimp pressure on the brazed seam, which can lead to a loose connection or wire pull-out over time.

Sustained Load at Rated Temperature

Under continuous electrical load, the tin-plated copper contact maintains conductivity up to the 221 Degrees F maximum operating temperature. The nylon insulation resists heat deformation within this limit, preventing creep that could loosen the fork on the stud. The terminal carries CSA and UL certifications for 600 V service, confirming performance for sustained duty rather than brief spikes.

Highlights

  • Tin-plated copper ensures reliable conductivity
  • 10 AWG capacity handles heavy-gauge wiring
  • 600 V rating supports industrial power circuits
  • Nylon insulation withstands 221 °F operating heat
  • Brazed seam resists separation under vibration

Specifications

TypeElectrical Connectors
BrandSTA-KON

Questions about this item

How can I confirm the crimp connection is solid after installing the terminal?

After crimping, tug the wire firmly to ensure it does not pull out of the barrel, then visually inspect that the copper conductor is fully seated and the nylon insulation shows no cracks.

What comes in the package and what extra items are required?

The package contains the fork terminals only; you will need a compatible crimp tool for 10 AWG wire and the #10 mounting hardware such as bolts or screws.

Which terminal should I select for a 10 AWG circuit rated at 600 V?

Choose this RC10-10FS model, which is built for 10 AWG wire, accepts a #10 stud, and carries a 600 V rating with yellow nylon insulation.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.