We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Blue nylon-insulated fork terminal for #10 stud, 14 AWG, 600 V

Sta-Kon

Sta-Kon RB14-10FS Fork Terminal #10 Stud 14 AWG 600 V Nylon

SKU CH-SP5K-MBK8C

A #10 stud fork terminal for 14 AWG wire, rated 600 V with nylon insulation and a brazed seam

  • TypeElectrical Connectors
  • CSA certified and UL listed for code compliance
  • 600 V rating handles standard power circuits
  • #10 stud size fits common terminal blocks
  • Nylon insulation resists heat to 221 °F
  • Brazed seam adds mechanical strength to crimp joint

#10 stud fork terminal for 14 AWG wire

This nylon-insulated fork terminal accepts a #10 stud and is rated for 14 AWG conductors at up to 600 V. It is designed for installers who need a crimp-on connection that can be removed without fully backing out the mounting screw. The partial-coverage insulation grip holds the wire insulation while the brazed seam resists opening under vibration.

Tin-plated copper contact rated to 221 °F

The copper contact carries a tin finish and is listed for a maximum operating temperature of 221 degrees Fahrenheit. Under normal loads the terminal runs cool and adds no audible noise to the circuit. Power draw is determined entirely by the connected load, not by the terminal itself.

Brazed barrel with 0.42 in barrel length

The brazed-seam barrel measures 0.42 inches in length and provides an insulation grip style that secures both conductor and insulation. Blue nylon insulation allows quick visual identification of the 14 AWG size. The fork tongue lets technicians attach or remove the terminal on a #10 stud without disconnecting adjacent wiring.

Highlights

  • CSA certified and UL listed for code compliance
  • 600 V rating handles standard power circuits
  • #10 stud size fits common terminal blocks
  • Nylon insulation resists heat to 221 °F
  • Brazed seam adds mechanical strength to crimp joint

Specifications

BrandSTA-KON
TypeElectrical Connectors

Questions about this item

How do I crimp the 14 AWG wire into the nylon-insulated barrel without damaging the insulation grip?

Strip the wire to match the 0.42 in barrel length, insert fully into the blue nylon insulation grip, and crimp with a ratchet tool sized for 14 AWG; the brazed seam prevents the barrel from splitting during compression.

Will the tin-plated copper contact need re-tinning or replacement after repeated thermal cycles up to 221 Degrees F?

The tin finish on the copper contact resists oxidation at the rated 221 Degrees F maximum operating temperature; no re-tinning is required, but inspect for discoloration or loose strands if the terminal sees frequent vibration.

At what current does the 600 V nylon insulation become the limiting factor during sustained load?

The 600 V rating is a dielectric limit, not a current limit; sustained current is governed by the 14 AWG wire ampacity and the #10 stud connection, not by the blue nylon insulation itself.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.