We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small bare copper locking fork terminals, pack of 100

Sta-Kon

Sta-Kon B14-10FL Locking Fork Terminal 18-14 AWG #10 Stud Pack 100

SKU CH-DSWA-H4MNV

Crimps onto 18-14 AWG wire with a #10 locking fork tongue for secure stud connections, rated to 600 V and 221 °F, supplied in a pack of 100

  • TypeSeries B
  • Locking fork resists vibration loosening on #10 studs
  • Tin-plated copper delivers reliable 600 V conductivity
  • Brazed seam prevents barrel separation under stress
  • Serrated barrel grips 18-14 AWG wire securely
  • CSA certified and UL listed for code compliance

Sta-Kon B14-10FL Locking Fork Terminal

The Sta-Kon B14-10FL is a non-insulated locking fork terminal built for 18-14 AWG wire and a #10 stud. It comes in a pack of 100 pieces for electrical and industrial wiring jobs. The copper contact has a tin finish and a brazed seam with a serrated barrel. It is UL Listed and CSA Certified for 600 V maximum voltage.

Suited for crimp connections needing a secure fork

This terminal suits installers who need a locking fork that resists vibration on a #10 stud. The bare copper barrel with tin plating handles up to 221 Degrees F operating temperature. Buyers who need insulated coverage or a different stud size should look at something else. RoHS compliance is not claimed for this part number.

Straightforward crimp installation

Install by stripping the wire and crimping the serrated barrel using an appropriate crimp tool for 18-14 AWG. The barrel length is .32 in and the tongue length is .42 in. The most common issue is using the wrong die size which can leave a loose crimp or damage the barrel. Verify the stud matches the #10 fork width before terminating.

Highlights

  • Locking fork resists vibration loosening on #10 studs
  • Tin-plated copper delivers reliable 600 V conductivity
  • Brazed seam prevents barrel separation under stress
  • Serrated barrel grips 18-14 AWG wire securely
  • CSA certified and UL listed for code compliance

Specifications

BrandSta-Kon
TypeSeries B

Questions about this item

What crimp tool and wire gauge do I need to attach these #10 stud fork terminals?

Use a crimper rated for 18-14 AWG non-insulated terminals and strip the copper wire to fit the .32 in barrel length before crimping the serrated barrel.

Will these tin-plated copper forks work on a legacy terminal block that uses #10 screws?

Yes, the #10 stud size matches the screw, the .42 in tongue reaches the contact surface, and the brazed seam holds shape when tightened on older blocks.

How can I confirm the connection is sound after crimping?

Inspect for a uniform crimp imprint on the serrated barrel, verify the locking fork tabs snap over the #10 stud, and check continuity with a meter across the joint.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.