SQUARE D
SQUARE D QOB225 Circuit Breaker 25A 2 Pole 120/240V AC
Two-pole 25 A miniature breaker rated 120/240 V AC and 48 V DC with 10 kA interrupting capacity, bolt-on mounting for QO load centres
- 25 A rating protects 120/240 V circuits reliably
- 10 kA interrupting rating clears faults safely
- Bolt-on mounting fits QO load centres directly
- Pressure-plate terminals accept wire without special tools
- Compact 3 × 1.5 × 2.9 in frame saves panel space
25 A QOB Bolt-On Breaker
The Square D QOB225 is a 25 A two-pole miniature circuit breaker rated for 120/240 V AC and 48 V DC. It belongs to the QO series and uses a bolt-on mounting style with a paddle actuator. Designed for single-phase QO load centres and NQOD panelboards, it fits a 100 A frame size.
10 kA AIR Rating at 120/240 V
The interrupting capacity is 10 kA at the rated AC voltage. This single figure determines whether the breaker can safely clear a fault in the panelboard where it will be installed. Verify that the available fault current at the point of installation does not exceed this rating.
Bolt-On Mount with Pressure-Plate Terminals
Installation requires bolting the breaker directly to the QO bus and securing conductors under the pressure-plate terminals. The most common issue is using a plug-on panel instead of a bolt-on bus, which prevents the breaker from seating correctly. Ensure the panelboard series matches the QOB designation before starting.
Highlights
- 25 A rating protects 120/240 V circuits reliably
- 10 kA interrupting rating clears faults safely
- Bolt-on mounting fits QO load centres directly
- Pressure-plate terminals accept wire without special tools
- Compact 3 × 1.5 × 2.9 in frame saves panel space
Specifications
| Brand | SQUARE D |
|---|
Questions about this item
How much current will the 25 A rating actually carry in a panel?
The breaker is rated to carry 25 A continuously in a Square D QO load centre at 120/240 V AC.
What does the 10 kA AIR rating limit on this breaker?
It limits the maximum prospective short-circuit current the breaker can safely interrupt to 10 kA at 120/240 V AC.
Will the 3 in by 1.5 in bolt-on frame fit my QO panelboard?
Yes, the 100 A frame size and bolt-on mounting are designed for Square D QO and NQOD panelboards.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
KINGSOM 907 Cordless Soldering Iron Kit 2-in-1 Corded Wireless 8s Heating 260-450°C 500-842°F
- Residential
Portable Soldering Iron USB-C Rechargeable 510 Thread 3-Level Temperature Black
- Residential



