We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Zinc lever arm with outside-offset steel roller 1.5 in long .75 in dia .25 in wide

SQUARE D

SQUARE D Lever Arm Limit Switch Actuator 1.5 in 9007T/FT

SKU CH-GFY7-BT7FY

A lever-arm actuator with a 1.5 in zinc arm and a 0.75 in steel roller fits Square D 9007C limit switches

  • TypeLight Switch
  • Standard roller actuator ensures reliable switching
  • 5 in arm length provides precise lever travel
  • 75 in steel roller withstands repeated contact
  • Zinc arm construction resists corrosion in harsh settings
  • Compatible with 9007C limit switch bodies

Lever Arm Limit Switch Actuator

This Square D lever arm actuator is designed for 9007C limit switches in industrial control circuits. The zinc arm measures 1.5 in with an outside-offset steel roller. It suits maintenance technicians and panel builders replacing worn actuators on existing 9007 series switches. The component is supplied new and ready for installation.

Compatibility check before ordering

Verify that the host switch is a Square D 9007C model, as the arm is built specifically for that series. Confirm the required roller position is outside offset and that the 0.75 in roller diameter and 0.25 in roller width match the application. The arm width is 0.44 in and arm depth is 0.73 in, so ensure mounting clearance accommodates these dimensions.

What the actuator changes

Fitting this lever arm restores precise mechanical actuation to the limit switch, allowing the roller to engage cams or targets at the correct travel point. The zinc arm and steel roller provide the specified 1.5 in reach and durable contact surface. No wiring, programming or additional hardware is included; the part only replaces the actuator on a compatible 9007C switch body.

Highlights

  • Standard roller actuator ensures reliable switching
  • 5 in arm length provides precise lever travel
  • 75 in steel roller withstands repeated contact
  • Zinc arm construction resists corrosion in harsh settings
  • Compatible with 9007C limit switch bodies

Specifications

BrandSquare D
TypeLight Switch

Questions about this item

What lever arm and roller come in the box, and is the 9007C limit switch included?

The box contains a zinc lever arm 1.5 in long with a steel roller 0.75 in diameter and 0.25 in wide. The 9007C limit switch body is sold separately.

This part is listed as 9007T/FT with a 1.5 in arm — are there other arm lengths or roller types for the same switch series?

The 9007T/FT model is defined by its 1.5 in arm length, outside-offset roller position, 0.44 in arm width and 0.73 in arm depth. Other arm lengths or roller configurations carry different part numbers.

With a 0.75 in steel roller and 1.5 in zinc arm, what actuation force and travel should I expect once mounted on a 9007C switch?

The 1.5 in zinc arm and 0.75 in steel roller transmit motion to the 9007C switch mechanism; actuation force and travel are determined by the switch body itself, not by this lever arm alone.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.