We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Metal lever arm with nylon roller, zinc finish, 2.5 in long

SQUARE D

SQUARE D Lever Arm 2.5 in 9007C

SKU CH-YT2A-AGKME

Standard roller lever arm with 2.5 in length, .63 in roller diameter and .25 in roller width for 9007AW limit switches

  • TypeLight Switch
  • Standard roller actuator ensures reliable limit-switch triggering
  • 5 in arm length provides precise mechanical reach
  • Nylon roller reduces wear on contact surfaces
  • Zinc arm construction resists corrosion in industrial environments
  • Compatible with 9007AW switch bodies for direct installation

Compatible Lever Arm for 9007AW Switches

This zinc lever arm is designed for Square D 9007AW limit switches. It provides a standard roller actuator with a 2.5 in arm length for industrial control applications. The nylon roller measures .63 in diameter and .25 in width.

Replaces Worn or Damaged Actuator Arms

Install this arm when the original actuator on a 9007AW switch shows wear or physical damage. The upgrade is worth it when the roller no longer rotates freely or the arm has bent out of alignment. It restores precise mechanical actuation without replacing the full switch body.

Fixed Geometry Limits Adjustment Options

The arm depth is .31 in with a tapered width and outside offset roller position. These dimensions are not adjustable, so the mounting point and actuation travel must match the existing hardware exactly. Builders needing a different roller offset or arm length cannot use this part.

Highlights

  • Standard roller actuator ensures reliable limit-switch triggering
  • 5 in arm length provides precise mechanical reach
  • Nylon roller reduces wear on contact surfaces
  • Zinc arm construction resists corrosion in industrial environments
  • Compatible with 9007AW switch bodies for direct installation

Specifications

BrandSquare D
TypeLight Switch

Questions about this item

What arm length and roller diameter does the 9007C lever arm provide for the limit switch?

The lever arm is 2.5 in long with a 0.63 in diameter nylon roller, giving the stated reach and contact surface for the 9007AW switch.

How do you mount the lever arm on the 9007AW switch, and what alignment step is often missed?

Fasten the tapered zinc arm to the switch shaft, then verify the 0.25 in wide roller sits in the outside offset position so the actuator travels squarely across the roller face.

Which parts of the 9007C lever arm wear first and need periodic replacement?

The 0.63 in nylon roller and the 0.31 in deep zinc arm pivot are the wear points; replace the roller when its 0.25 in width shows flattening or the arm when pivot play appears.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.