We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Square D 9013FR pressure switch, compact grey metal housing, 1/4 inch port, DPST contacts

SQUARE D

SQUARE D 9013FR Pressure Switch 80-60PSI DPST 10A

SKU CH-39TJ-ABVWS

Controls water pumps at 80-60 psi with DPST contacts rated 10 A, operating from -22 to 257 °F

  • TypeLight Switch
  • Controls water pump at 80/60 psi factory settings
  • DPST contacts handle 10 A at 120/240 V
  • Operates reliably from -22 to 257 °F
  • Single 1/4 in FNPT port simplifies plumbing
  • NEMA 1 enclosure suits indoor installations

Square D 9013FR Pressure Switch 80-60PSI

The Square D 9013FR is a pressure switch designed to control water-pump systems. It opens and closes contacts at factory-set pressures of 80 psi on and 60 psi off. The unit fits a single 1/4 inch FNPS port and carries a NEMA 1 enclosure rating for indoor use. It operates across a temperature span of -22 to 257 degrees Fahrenheit.

Suits pump automation, not general lighting

This switch suits installers who need reliable on-off control for a water pump within the 40 to 100 psi range. It is not a dimmer or fan-speed controller, so buyers who need variable lighting levels or motor-speed adjustment should look at a different device. The reverse-action DPST contacts are built for pump cycling, not for standard lighting circuits.

Pressure range 40-100 psi

The adjustable pressure range runs from 40 to 100 psi and the differential spans 20 to 30 psi. These figures determine whether the switch will start and stop the pump at the pressures your system requires. Verify the range and differential against the pump specifications before purchasing.

Highlights

  • Controls water pump at 80/60 psi factory settings
  • DPST contacts handle 10 A at 120/240 V
  • Operates reliably from -22 to 257 °F
  • Single 1/4 in FNPT port simplifies plumbing
  • NEMA 1 enclosure suits indoor installations

Specifications

BrandSquare D
TypeLight Switch

Questions about this item

What pressure range does the 9013FR switch cover and where are the factory on/off points set?

The switch operates from 40 to 100 psi with factory settings at 80 psi on and 60 psi off, giving a 20 to 30 psi differential.

What port size and type does the 9013FR use for mounting to a water system?

It has a single 1/4 in FNPS port for direct connection to the pump or piping.

How is the 9013FR wired and what common mistake should be avoided?

Wire the DPST contacts to the motor circuit at 120 V or 240 V single-phase up to 1 hp; the frequent error is reversing line and load terminals.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.