We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Square D 9013FR pressure switch, compact grey enclosure with single port and electrical terminals

SQUARE D

SQUARE D 9013FR Pressure Switch 22/16 psi DPST 10A

SKU CH-24J3-GSVWQ

Controls water-pump pressure at 22/16 psi with a 10 A DPST contact and 1/4 in FNPS port

  • TypeLight Switch
  • Controls water-pump pressure automatically
  • Factory set to cut in at 16 psi and cut out at 22 psi
  • DPST contacts switch both lines for safer motor control
  • Rated 10 A at 120 V or 240 V single-phase
  • Operates from –22 °F to 257 °F for harsh environments

9013FR Pressure Switch for Water Pumps

The Square D 9013FR is a DPST pressure switch designed to control water-pump motors automatically. It suits residential or light-commercial installations where a compact, factory-set switch is required.

Simple Wiring with 1/4 in FNPS Port

The single 1/4 in FNPS port connects directly to standard pump fittings. DPST contacts break both lines for safety. Installers must verify the 10 A rating matches the motor load to avoid contact welding.

Factory 22/16 psi Range with 6–20 psi Differential

The switch turns the pump on at 16 psi and off at 22 psi, handling up to 1 hp at 120 V or 240 V single-phase and 240 V three-phase. Operation is rated from -22 to 257 °F. It does not suit systems needing pressures above 25 psi or an unloader valve.

Highlights

  • Controls water-pump pressure automatically
  • Factory set to cut in at 16 psi and cut out at 22 psi
  • DPST contacts switch both lines for safer motor control
  • Rated 10 A at 120 V or 240 V single-phase
  • Operates from –22 °F to 257 °F for harsh environments

Specifications

BrandSquare D
TypeLight Switch

Questions about this item

How do I confirm the switch activates the pump at 22 psi and deactivates at 16 psi after installation?

Observe the pressure gauge; the pump should start when pressure falls to 16 psi and stop when it rises to 22 psi, matching the factory on/off setting.

What comes in the box and what must I supply separately?

The box contains the 9013FR pressure switch with 1/4 in FNPS port; you must supply pipe fittings, wiring, and a pressure gauge.

Which pressure range version suits a system that runs between 4 and 25 psi?

This model covers a 4 to 25 psi range with a 22/16 psi factory setting and adjustable 6 to 20 psi differential, fitting that operating window.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.