We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Square D 9013FHG pressure switch, grey metal housing, 1/4 inch port, DPST contacts

SQUARE D

SQUARE D 9013FHG Pressure Switch 80-100PSI DPST 10A

SKU CH-6D1B-Z8EVJ

Pressure switch for air compressors and water pumps with 80 to 100 psi range and 20 psi differential

  • TypeLight Switch
  • Reliable pressure control for air compressors and water pumps
  • Factory-set 80-100 psi range with 20 psi differential
  • DPST contact form handles up to 10 A electrical loads
  • NEMA 1 enclosure suits indoor installation environments
  • Supports 1.5 hp at 120 V and 2 hp at 240 V single-phase

Pressure Switch 80–100 PSI DPST

The Square D 9013FHG is a pressure switch designed for air compressors and water pumps. It operates with a factory-set on/off range of 80 to 100 psi and a 20 psi differential. The unit features a DPST contact form rated at 10 amps and a single 1/4 inch FNPT port.

Sustained Load Behaviour

Under continuous cycling the switch maintains its 80 to 100 psi band with a consistent 20 psi differential. The NEMA 1 enclosure provides basic indoor protection for the electrical contacts. Standard action ensures reliable make/break performance across the full 20 to 100 psi operating range.

Upgrade Context

This model replaces switches with lower pressure ranges or different contact configurations. The jump is worthwhile when a system requires the specific 80 to 100 psi band and DPST switching for dual-circuit control. It is not suited for applications needing an unloader valve or outdoor-rated enclosures.

Highlights

  • Reliable pressure control for air compressors and water pumps
  • Factory-set 80-100 psi range with 20 psi differential
  • DPST contact form handles up to 10 A electrical loads
  • NEMA 1 enclosure suits indoor installation environments
  • Supports 1.5 hp at 120 V and 2 hp at 240 V single-phase

Specifications

BrandSquare D
TypeLight Switch

Questions about this item

Does the 9013FHG run hot or draw extra power when the compressor cycles all day?

The switch is a mechanical contact rated 10 A at 120 V or 240 V; it adds no measurable heat or power draw beyond the motor it controls.

What fittings and wiring must I already have to install this pressure switch?

You need a 1/4 in FNPS port connection and supply wires sized for up to 10 A at your circuit voltage.

Will the 80-100 psi range work with my older 120 V single-phase motor rated below 1 1/2 hp?

Yes, the DPST contacts are rated 1 1/2 hp at 120 V single-phase, so motors up to that rating are compatible.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.