SQUARE D
SQUARE D 9007MS Limit Switch Lever Arm 1.5in Roller 0.75in
A 1.5 in lever arm with a 0.75 in steel roller fits 9007MS limit switches
- Standard roller actuator for precise switching
- 5 in arm length fits 9007MS limit switches
- 75 in steel roller ensures smooth operation
- Zinc arm with 0.62 in width resists corrosion
- 25 in roller width suits standard applications
Compatible Actuator for 9007MS Switches
This zinc limit-switch lever arm fits Telemecanique Sensors model 9007MS units. It provides a standard roller actuator with an outside-offset roller position. The arm length is 1.5 in and the roller diameter is 0.75 in.
Verify Mounting and Travel Before Installing
Confirm the switch body is a 9007MS unit and that the mounting pattern matches the arm width of 0.62 in and arm depth of 0.31 in. Ensure the outside-offset roller orientation suits the cam or target approach direction. Check that the 0.25 in roller width clears the actuation path without binding.
Low-Friction Operation in Standard Environments
The steel roller on zinc arm construction reduces friction during actuation cycles. No lubrication is required for normal use at typical industrial temperatures. The assembly adds minimal mass to the switch mechanism, preserving the original snap-action response and contact force.
Highlights
- Standard roller actuator for precise switching
- 5 in arm length fits 9007MS limit switches
- 75 in steel roller ensures smooth operation
- Zinc arm with 0.62 in width resists corrosion
- 25 in roller width suits standard applications
Specifications
| Brand | TELEMECANIQUE SENSORS |
|---|
Questions about this item
Does the lever arm come with the 9007MS limit switch body or must it be purchased separately?
The lever arm is sold as a standalone actuator; the 9007MS limit switch body is not included and must be bought separately.
How do I choose between the available arm lengths and roller diameters for the 9007MS?
This model has a fixed 1.5 in arm length and a 0.75 in roller diameter; no alternative sizes are offered for this part number.
What does the 1.5 in arm length mean when the lever is mounted on a 9007MS switch?
It gives a 1.5 in distance from the switch mounting face to the centre of the 0.75 in steel roller, with the roller positioned on an outside offset.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
