SQUARE D
SQUARE D 9007MS Lever Arm 1.5 in Roller 0.75 in
A zinc lever arm with a 1.5 in nylon roller fits 9007MS limit switches
- Standard roller actuator ensures reliable limit switching
- 5 in arm length provides precise actuation reach
- 75 in nylon roller reduces wear on contact surfaces
- Zinc arm construction delivers durable mechanical performance
- Compatible with 9007MS limit switch models
Lever Arm for 9007MS Limit Switches
This zinc lever arm fits Telemecanique Sensors 9007MS limit switches. It provides a 1.5 in arm length with a standard nylon roller. The component suits maintenance technicians and OEM assemblers replacing worn actuators on existing machinery.
Mechanical Actuation Limits
The roller sits at an outside offset position with a 0.75 in diameter and 0.25 in width. These dimensions fix the trip point and over-travel distance for the host switch. Builders needing a different roller profile or arm reach must select an alternative actuator model.
Zinc Arm with Nylon Roller
The 0.62 in wide by 0.31 in deep zinc arm resists bending under repeated operation. The nylon roller reduces wear on the cam or dog compared to metal rollers. Mounting hardware is not included; the arm attaches directly to the switch shaft using the existing fastener.
Highlights
- Standard roller actuator ensures reliable limit switching
- 5 in arm length provides precise actuation reach
- 75 in nylon roller reduces wear on contact surfaces
- Zinc arm construction delivers durable mechanical performance
- Compatible with 9007MS limit switch models
Specifications
| Brand | TELEMECANIQUE SENSORS |
|---|
Questions about this item
Should I choose the 1.5 in arm or a shorter arm for my 9007MS limit switch?
The 1.5 in arm length matches the 9007MS design; select it when the mounting geometry requires that reach, otherwise a shorter arm will not engage the target at the same point.
How does the 0.75 in roller diameter affect actuation in a real machine?
The 0.75 in nylon roller reduces friction and wear on the cam, giving consistent actuation force and longer contact life compared with a bare metal lever.
Does the 0.62 in arm width and 0.31 in depth fit the 9007MS mounting bracket?
Yes, the 0.62 in wide by 0.31 in deep zinc arm is dimensioned for the 9007MS mounting pattern, so it bolts on without adapters or modifications.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
