We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black zinc lever arm with steel roller, 2 in arm length, roller outside offset

SQUARE D

SQUARE D 9007C Limit Switch Lever Arm 2 in

SKU CH-8GJM-CDAEP

A 2-inch zinc lever arm with a 0.63-inch steel roller, 0.25-inch roller width and 0.31-inch arm depth for 9007AW limit switches

  • TypeLight Switch
  • Color/FinishBlack
  • Standard roller actuator fits 9007AW limit switches
  • 2 in arm length positions roller for reliable actuation
  • Zinc arm with steel roller resists wear in industrial use
  • 63 in roller diameter ensures consistent contact engagement
  • 31 in arm depth suits compact enclosure mounting

Lever Arm for 9007AW Switches

This Square D 9007C lever arm is a replacement actuator designed for 9007AW limit switches. It features a standard roller actuator with an outside offset position. The arm is constructed from zinc with a steel roller. It comes in a black finish.

Upgrades Worn or Damaged Actuators

Install this arm when the original lever on a 9007AW switch shows wear, corrosion, or mechanical damage. The 2 in arm length and .63 in roller diameter restore the original actuation travel and force. The .25 in roller width and .31 in arm depth match the factory specifications for proper engagement.

Fits 9007AW Limit Switch Bodies

This component mounts directly to compatible 9007AW switch bodies without modification. The tapered zinc arm and steel roller assembly frees the mechanism from binding caused by deformed original parts. It serves maintenance and repair operations on existing limit switch installations.

Highlights

  • Standard roller actuator fits 9007AW limit switches
  • 2 in arm length positions roller for reliable actuation
  • Zinc arm with steel roller resists wear in industrial use
  • 63 in roller diameter ensures consistent contact engagement
  • 31 in arm depth suits compact enclosure mounting

Specifications

BrandSquare D
TypeLight Switch
Color/FinishBlack

Questions about this item

Will the 2 in arm and .63 in roller diameter clear my 9007AW mounting bracket?

The lever arm is 2 in long with a .63 in outside‑offset roller, matching the 9007AW actuator profile.

Which way does the roller face when I bolt the arm onto the switch body?

The roller sits on the outside offset; install the arm so the roller points away from the switch housing.

How often should I check the .25 in wide steel roller for wear?

Inspect the roller at each preventive‑maintenance interval; replace the arm if the steel roller shows flat spots or excess play.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.