Advance Tabco
Advance Tabco FC-1-1818-X Wall Mounted Sink 18 in x 18 in, 304
- Silver
$790.99
0.0091904BTC
In stock
SQUARE D
SQUARE D 60A Flange Disconnect Switch
A 60 A flange-mounted disconnect switch rated for 15 hp at 240 V, 30 hp at 480 V and 50 hp at 600 V with a corrosion-resistant Valox housing
- TypeLight Switch
- 60 A rating powers heavy-duty three-phase loads
- 15 hp at 240 V, 30 hp at 480 V, 50 hp at 600 V
- Flange mounting fits 6.63 in to 18 in depth range
- Valox housing resists corrosion, impact and UV exposure
- Non-fusible design with included mounting hardware and operating mechanism
60 A Flange Disconnect Switch
This Square D flange disconnect switch provides a 60 A current rating for heavy-duty three-phase circuits. It mounts with a flange style and includes all necessary mounting hardware and an operating mechanism. The non-fusible design suits applications where separate over-current protection is already installed. Buyers needing fused protection or a different pole count should look elsewhere.
Sustained Load Performance
The switch is rated for continuous duty at 60 A across three phases. It delivers 15 hp at 240 V AC, 30 hp at 480 V AC and 50 hp at 600 V AC under sustained motor loads. The Valox housing resists corrosion, impact and UV exposure during long service periods. Installations requiring higher horsepower ratings at these voltages will need a larger device.
Thermals Noise and Power Draw
The Valox enclosure dissipates heat without active cooling, so operation is silent. Power draw is limited to the small loss across the contacts during normal switching. Mounting depth can be set between 6.63 in and 18 in to fit the available enclosure space. Environments demanding forced-air cooling or sealed hazardous-location ratings are not addressed by this model.
Highlights
- 60 A rating powers heavy-duty three-phase loads
- 15 hp at 240 V, 30 hp at 480 V, 50 hp at 600 V
- Flange mounting fits 6.63 in to 18 in depth range
- Valox housing resists corrosion, impact and UV exposure
- Non-fusible design with included mounting hardware and operating mechanism
Specifications
| Brand | Square D |
|---|---|
| Type | Light Switch |
Questions about this item
Does the 60 A flange switch generate noticeable heat or noise when running continuously?
The non-fusible, heavy-duty unit has no moving parts that create audible noise and its Valox housing dissipates heat passively during all-day operation.
What existing electrical infrastructure is required to install this 60 A disconnect?
A three-phase supply at 240 V, 480 V or 600 V AC, a flange mounting surface between 6.63 in and 18 in deep, and the included mounting hardware.
Will this 60 A switch coordinate with older 15 hp motor starters still in the panel?
At 240 V AC the switch is rated for 15 hp, matching legacy starters of that horsepower on the same voltage.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
