Spilltech
Spilltech WSO1210 Sorbent Sock 3 in x 12 ft Oil White 10 PK
Absorbent oil sock kit contains ten 12-foot poly-blend tubes for 25-gallon spill containment
- Size3 in x 12 ft
- ColorWhite
- Absorbs up to 25 gallons of oil per pack
- Ten socks provide broad coverage for large spills
- Each 12‑foot sock surrounds equipment or containment areas
- White colour shows saturation level at a glance
- Polypropylene skin resists tearing during deployment
Oil spill response socks
Each pack contains ten white sorbent socks measuring three inches by twelve feet, designed to absorb oil-based fluids in garage and shop environments. The poly-blend filler and polypropylene skin target oil while repelling water, providing a combined absorption capacity of twenty-five gallons per package.
Check floor layout and fluid type
Verify that the primary spill risk is oil rather than water or chemicals, as these socks are oil-selective. Ensure you have enough linear footage to encircle or line the equipment zones where leaks occur, since each sock covers twelve feet.
Poly-blend filler with polypropylene skin
The filler material increases absorption capacity to two gallons per sock while the outer skin resists tearing during deployment. The round profile without an internal rope allows the sock to conform around machine bases and uneven surfaces for faster containment.
Highlights
- Absorbs up to 25 gallons of oil per pack
- Ten socks provide broad coverage for large spills
- Each 12‑foot sock surrounds equipment or containment areas
- White colour shows saturation level at a glance
- Polypropylene skin resists tearing during deployment
Specifications
| Brand | SPILLTECH |
|---|---|
| Size | 3 in x 12 ft |
| Color | White |
Questions about this item
What comes inside the Spilltech WSO1210 pack and do I need any extra fixings?
The pack contains ten white sorbent socks, each measuring 3 in by 12 ft and filled with a poly blend inside a polypropylene skin. No rope runs along the length, so you simply lay them in place; no additional hardware is required.
How do I decide between the different capacity options for the Spilltech WSO1210?
This model is offered as a single 10-pack configuration that absorbs 25 gallons in total, with each sock taking up to 2 gallons. If you need more coverage, buy additional packs; there are no smaller or larger pack sizes for this item.
What does the 25-gallon absorption figure mean when the socks are used in a real spill?
The 25-gallon rating is the combined capacity of all ten socks under test conditions. In practice, actual uptake depends on oil viscosity, temperature and how fully each 3 in by 12 ft sock contacts the liquid, so allow a safety margin when planning containment.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
