Spilltech
Spilltech Sorbent Pad 30 in x 30 in Oil White 50 PK
Oil-only sorbent pads absorb up to 41 gallons per 50-count package, each 30 by 30 inches and perforated at 15 by 30 inches
- Size30 in x 30 in
- ColorWhite
- Absorbs up to 41 gallons of oil per pack
- Each 30 in x 30 in pad holds 106 oz of fluid
- 50 perforated pads tear cleanly at 15 in intervals
- Three-layer polypropylene construction resists tearing during use
- White colour makes oil saturation instantly visible
Oil-Only Sorbent Pads
These Spilltech pads absorb oil and petroleum-based fluids while repelling water, making them suited for workshops, marinas and industrial sites where hydrocarbon spills occur. Each pad measures 30 in by 30 in and is constructed from three layers of perforated polypropylene for strength and reduced linting.
Upgrade from Loose Absorbents
The perforated 15 in by 30 in sections let you tear off only what you need, cutting waste compared with bulk rolls or granular sorbents. A 50-count package absorbs up to 41 gal total, with each pad holding 106 oz, so larger spills are contained faster and disposal volume drops.
For Maintenance Teams Handling Oil Leaks
Facilities that need quick deployment on water or land will value the white colour for visible saturation and the oil-selective chemistry. Operations requiring universal or chemical absorbents, or those needing smaller pad sizes for tight machinery, should evaluate alternative sorbent formats.
Highlights
- Absorbs up to 41 gallons of oil per pack
- Each 30 in x 30 in pad holds 106 oz of fluid
- 50 perforated pads tear cleanly at 15 in intervals
- Three-layer polypropylene construction resists tearing during use
- White colour makes oil saturation instantly visible
Specifications
| Brand | SPILLTECH |
|---|---|
| Size | 30 in x 30 in |
| Color | White |
Questions about this item
Will a 30 in x 30 in pad fit inside a standard 30 in spill containment tray?
Each pad measures 30 in by 30 in, so it matches a 30 in tray edge-to-edge without trimming.
How do you use the 15 in perforations when laying pads around a leaking drum?
Tear along the 15 in perforations to create two 15 in x 30 in pieces, then overlap the halves around curved surfaces for full contact.
After absorbing 106 1/2 oz of oil, how is the pad replaced?
Remove the saturated polypropylene pad and substitute a fresh one from the 50-count pack to restore the 41 gal total capacity.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
