We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Yellow and black compact GFCI outlet tester with rubber grips and neon indicator lights

Sperry Instruments GFI6302 GFCI Outlet Tester

SKU CH-SGNA-S7SRY

Tests standard and GFCI-protected 120 V AC outlets with seven visual wiring indicators, CAT III 300 V rating, and 10 ft drop durability

  • FeaturesGFCI Outlet/Receptacle Tester, Corded Electric, false
  • Height6.75 L x 3.75 W x 1 H inches
  • Width6.75 L x 3.75 W x 1 H inches
  • Length6.75 L x 3.75 W x 1 H inches
  • Weight0.1 pounds
  • Sports Team1 Piece
  • Tests GFCI and standard 120 V AC outlets
  • Seven wiring conditions shown by colour-coded neon lights
  • Compact 6.75 × 3.75 × 1 in tester weighs .1 lb
  • Rated 10 ft drop and 250 lb crush with CAT III 300 V
  • Wiring legend printed both sides for 360° visibility

Compact GFCI Receptacle Tester

The Sperry Instruments GFI6302 checks standard three-wire and GFCI-protected 120V AC outlets. Bright neon indicators display seven wiring conditions using a legend printed on both sides for 360-degree visibility. A hi-impact ABS housing with over-moulded rubber grips survives 10-foot drops and 250-pound crush loads. CAT III 300V rating and C-UL US, CE and OSHA NRTL recognition support professional and home use.

Electricians, inspectors

Suits anyone needing quick pass-fail confirmation on 120V receptacles at 60Hz. The tester only evaluates wiring configuration; it does not measure voltage level, current capacity, loop impedance or insulation resistance. Buyers who require quantitative readings or three-phase and higher-voltage analysis should select a different instrument.

Seven-condition wiring legend on two faces

The single decisive specification is the seven visual indications covering open ground, open neutral, open hot, hot-ground reverse, hot-neutral reverse and correct wiring plus a GFCI trip test. This legend is moulded onto both sides of the body so the result is readable from any angle without repositioning the tool.

Highlights

  • Tests GFCI and standard 120 V AC outlets
  • Seven wiring conditions shown by colour-coded neon lights
  • Compact 6.75 × 3.75 × 1 in tester weighs .1 lb
  • Rated 10 ft drop and 250 lb crush with CAT III 300 V
  • Wiring legend printed both sides for 360° visibility

Specifications

BrandSPERRY, Sperry Instruments Inc
FeaturesGFCI Outlet/Receptacle Tester, Corded Electric, false
Height6.75 L x 3.75 W x 1 H inches
Width6.75 L x 3.75 W x 1 H inches
Length6.75 L x 3.75 W x 1 H inches
Weight0.1 pounds
Sports Team1 Piece
TypeHertz

Questions about this item

Does the GFI6302 test both standard three-wire outlets and GFCI-protected 120 V AC outlets?

Yes, the tester checks standard three-wire receptacles and GFCI-protected 120 V AC outlets, including outlets wired in series with a GFCI such as multiple kitchen or bathroom receptacles.

What does the 60 Hz rating mean when I plug the tester into a live circuit?

The 60 Hz figure is the line frequency the GFI6302 is designed for; it confirms the outlet is supplying standard North American 60 Hz AC power while the neon indicators reveal the wiring condition.

What protection does the CAT III 300 V rating give me on a job site?

CAT III 300 V means the tester is rated for use on fixed building wiring up to 300 V, and the housing survives a 10 ft drop and 250 lb crush, so it withstands typical construction-site abuse.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.